Recent content by POM

Originally Posted By: Techniker Originally Posted By: POM I have used Tufoil for some years now in my -95 model 5 series BMW. With Tufoil here is less mechanical/engine noise and the valve lifter noise has totally disappeared, there must then be some reduced mechanical engine wear as I see it if...

I have used Tufoil for some years now in my -95 model 5 series BMW. With Tufoil here is less mechanical/engine noise and the valve lifter noise has totally disappeared, there must then be some reduced mechanical engine wear as I see it if there is less mechanical engine noise. Here in the cold...

Originally Posted By: Mystic Check the FTC website someday. Several companies that made various oil additives and supplements were fined by the FTC. You will find some names you probably know. Only maker of a additive that contains PTFE that never made the list as far as I know was the company...

I have a similar car, BMW 520I 1995 (European) model with the M50 engine. This car had also some problems with valve lifter clicking noise at start-up. I have also used Auto-RX but it didn’t help regarding this problem. But after I start using Tufoil engine oil treatment in 2007 the clicking...

Originally Posted By: vxcalais Would you use, or see any benifit in using a Teflon based addtive such as 'Nulon Transmission Treatment'. I know Teflon has no benefit in engine oil additives.....what about the other regions ? I don’t know about the mention “Nulon Transmission Treatment” but I...

Originally Posted By: FrankP DOES ANYONE HAVE ANY EXPERIENCE WITH THESE ITEMS? DO THEY WORK? WILL THEY CAUSE ANY DAMAGE TO AN ENGINE? I have been successfully using Tufoil for approximately two years in my BMW520 (1995 European model). My experiences is that Tufoil gives less engine noise...

Originally Posted By: benjamming POM, Any UOAs? Sorry, I have no UOA's. I agree that such UOA taken prior to and after use of oil additives such as Tufoil will tell a lot.

In my BMW 520I (1995 model) I have used Tufoil with very good results with 5-40W oil, less engine noise and smoother acceleration and some reduction in fuel consumption. Now I am in a middle cleaning phase with Auro-RX (without Tufoil) using 5-50W oil. At start-up there is now more valve train...

I think the primary ingredient in Coca Cola is in fact water but we still buy it don’t we? Does Cocoa Cola taste like water because of the primary ingredient?

I support and agree with you Deven! I have used Tufoil my self for over a year now in both my cars. I have the same experience as you, less engine noise, some reduction in fuel consumption. I also added Tufoil in the transmission oil (manual gearbox) on one of the cars that had a tricky gear...

I am A Tufoil fan my self. This additive really works for me, less fuel consumption, better acceleration, less mechanical noise from the motor… (Many here are sceptical to additives which contain Teflon so I think you will get some recommendation not to use the Tufoil) I will do an AutoRX...

I have now used Tufoil in my -95 model BMW 520I for about a year now with good results, less valve train noise and in fact some fuel reduction. It also “feels” that the car accelerate slightly better (less friction may be?). Many people are sceptical to oil additives which contain PTFE (Teflon)...

After I added the Tufoil (WWW.tufoil.com) “oil additive” in my transmission on my (European model) Ford Mondeo the gear shift from 1 to 2 gear has become “perfect”, previously this was a problem on this car. I must also say that I also use this Tufoil “oil additive” in the engine oil on this...

For info. see: [Link removed.]

I have also good experiences with the use of Tufoil. I use Tufoil in the motor oil (M1 0-40W synt. motor oil) and in the gear box on my Ford Mondeo (European model). I had some problems with the gear shift between 1 and 2 gear in this car before I added the Tufoil to the gear box, now the gear...