Recent content by Jdsaye

P0522. Will check plugs

Monitored the pump solenoid. When temp is reached, solenoid locks in and remains in alternate pressure mode.

Using the mopar filter and recommended oil viscosity.

30-40 psi. Stays closer to 30

Sending unit was replaced. Mechanical gauge bypasses sending unit. Actual pressure drops off momentarily causing the oil light. Obviously not significant impact on engine. Have driven this way for 30k.

I agree with the first part, but don’t believe a relief exists outside of the pump itself. Replaced with pump.

Tube O-ring installed correctly.

Replaced and re-replaced.

Braking, turning or acceleration has no effect. Comes on when the engine achieves normal operating temperature.

Pickup tube cleaned and checked with pump replacement.

My 2015 jeep engine oil light began to come on when the engine achieved normal temperatures at about 80k miles. No rattling or noise from the engine. Had the filter housing and oil sensor replaced since I could smell a bit of oil at an idle. Oil light continued to come on so I had the 2 stage...