You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
While doing a brake job yesterday on my daughter's 2009 CR-V, I needed a 17mm open-end wrench in order to hold a nut on the sliding pin...
-
I take it the “ factory fix” is to establish a continuous circulation loop rather than a single pass? A high flow rate aquarium pump...
-
CLR Has a specific chemical for this now.
https://www.clrbrands.com/proline/products/clr-pro/clr-pro-heavy-duty-radiator-flush-and-cleaner/
-
Be careful with garden hose pressures. This method can cause leaks, as water pressure is generally higher than rated cooling system max...
-
Just make sure you regulate the air pressure down as per the directions. 120 PSI is not going to be kind to cooling system components.
-
I had repeated issues with my heater core blocking up each winter on my BMW for three years. Tried various chemicals and flushing with...
-
First resort should be just to backflush with water from a garden hose.
If that brings no joy, go for a more serious approach.
-
Don't see why one of the chinesium $20 fluid pumps wouldn't work. Might not want to run it for 2 hours straight up, but 10-15 min...
-
I have always disconnected the far ends of the heater hoses and reverse flushed with a garden hose. If you need to rely on chemicals, it...
