Recent content by Giles

Just tuned in after being away for a couple years. Where the results of this study ever published or did the test never complete? Edit: Nevermind, I just read some other threads about this topic [ September 20, 2005, 02:46 AM: Message edited by: Giles ]

One thing to consider if you are going to do oil analysis is that you won't know if the viscosity is close to what it started with since you will only be estimating the effects on viscosity.

Mobil 1 5w30 hasn't thinned on me in 4000 miles. I think you need to look at percentage thinning rather than absolute CST number to see how well it holds up.

I think the 0w30 is ok, maybe just change it more frequently in the summer months.

My '02 Ford Explorer with a 4.0L engine would be: 600*(5qt/5qt)*(244ci/220hp) =600*1.109 =665 I get 15mpg on average so that would be 665*15 = 9975 mile interval. Click here to convert from Liters to cubic inches or visa-versa (look for volume)

Bubbls could be from overfilling the crankcase, so make sure you have the right level.

For $250, whoever created these should be able to explain them. It does seem odd that that the x axis is dates in reverse. I would expect a normal trend line to have dates increasing left to right. I'm not sure what the trend is based upon other than days in service. Miles don't seem to be...

Joe, good advice, but which one is accurate? I will probably use Ana, but not sure if it is the one that's in accurate.

**UPATED SAMPLE INFORMATION** Vehicle '02 Explorer Miles on Vehicle 3906 1st sample, 2900 miles on oil. Miles on Vehicle 5012 2nd sample, 4000 miles on oil. 5w30 Mobil 1 SuperSyn Engine 4.0L V6 SOHC "Driving Conditions - 2000 Miles highway, the rest mixed city/highway" 1st Sample 12/21/02...

I have an '02 Explorer and I'm running M1 5w30 and have posted some results on this forum. After much research, I decided to go with the Motorcraft filter for now, and might switch the the K&N filter. I will be posting follow up results in a couple weeks on my oil change that has 4000 miles on it.

I use the fumoto valve and the quality is top notch. I'm not sure of the fram product. I think they are worth it especially if you plan on doing oil analysis.

I have them on 3 vehicles (2 Explorers, 1 Toyota Camry) and haven't had any problem at all. The valves on the ford's are bigger so drain faster than the Toyota valve, but both drain as much as the standard plug. Whether or not you have the clearance depends, since you need about 1/2" to add the...

It's possible because the height of the threads matches the height of the nut that it screws into. I've read where someone let it drain and then removed the valve completely and nothing else came out, proving this. I'm not that worried about a bit of residual oil since it all get's blended into...

Buster, What's the total cost per quart after shipping costs are added, and your $20/year fee?

Redrebel, I think you should stick with Mobil 1 if you want to keep the car until it dies. You can benefit from the higher TBN of Mobil or Amsoil. I take it from your description that you sit in traffic as much as you are moving (lot's of idling). If you only plan on selling it before 50,000...