Recent content by DoggoWoggo

Only code I got is a P0113

The main relay seems to power on the fuel injectors, and fuel pumps. Fuel seems to be getting to the engine block and the fuel pumpalso primes when key is on! Not sure it’s the main relay! I believe I might be having an ignition problem. I’ve sprayed starter fluid into the throttle body and no...

I’ll let you know

The car cranks but no start. Battery light shows on but I just changed the battery. Basically when I turn the car on it blinks maint required, while battery light and the oil light stays on. Gas seems to enter the engine but then there’s no ignition . Does oil cause a no start? The car also...

Thank you decided to purchase an aluminum thermostat housing.

I have another question . I see what you mean by assembly though is there any way to remove the part I need from the assembly or would that break the part I need? Everything else is fine besides that one piece.. only place I’ve noticed leaking.

Where could I go to find kits? Thank you!

Seems like the inside did melt! :O. Now I need the name of that one piece! Could it be cuz there wasn’t the right amount of antifreeze (cuz there wasn’t) and caused the engine heat to transfer? Do you know if there’s a metal piece?? Thank you!!

It seems like the plastic thing melted more specifically here’s a picture. Now I’m just looking for the name of the part! Thank you! Most likely what melted is not the right amount of antifreeze and engine heat got into the plastic housing!

Hello is there a name for the plastic thing? Where could I look to find the plastic part? And is there a metal piece I can replace it with. Thank you. I checked the plastic thing and it seems like bits of it melted. Made a new comment talking about it. Now I just need the name of the plastic thing!

I squeezed the clamps before working in the throttle body and it did shoot some antifreeze then but before then it never “exploded” everywhere. So I’m assuming I must’ve broken something. hello guys might’ve figure out the problem. There are gaps where there shouldn’t be most likely. What I...

From the blue line to the circle. the plastic part the hose is connecting to is loose and is leaking anti freeze when ever I push down on the hose the plastic part lifts up from the gasket I believe its called, and antifreeze spills. Is a part broken, do I need a new gasket, did a clip break and...