Number_35
From Winnipeg MB CA
- Joined
- Messages
- 7,698
- Reaction score
- 6,360
Latest activity Postings About
-
-
Number_35 replied to the thread 2007 Dodge Grand Caravan - Front Strut Assemblies.There are clunks and rattles coming from the front end. I replaced the stabilizer-bar end links (which got rid of some of the noise)... -
Like the unlawful union of a Chrysler Town and Country and a Fiat 500, LOL.
-
PT Cruiser vibes from this one. 2011–2015 Lancia Ypsilon (an Italian brand under the Stellantis umbrella) Rebadged and sold as the...
-
Swamp coolers and cooling with water only works well in dry climates. In South Texas that would just make them even wetter along with...
-
Number_35 reacted to SC Maintenance's post in the thread Evaporative cooling in the drive thru. with
Like.
Normal. They do that at all of them around here during busy times. If the relative humidity is below 40% it works very well. The... -
Number_35 replied to the thread 2007 Dodge Grand Caravan - Front Strut Assemblies.I'm not sure if this is the right product - as far as I know, the van has standard suspension. Where would I find the three-letter code...
-
-
Number_35 replied to the thread 2007 Dodge Grand Caravan - Front Strut Assemblies.I have two pairs of spring compressors, which makes it easier.
-
Number_35 reacted to KEVINK0000's post in the thread 2007 Dodge Grand Caravan - Front Strut Assemblies with
Helpful.
I have some recent experience for you on the same vehicle, except it’s a ‘07 T&C. Went with 4 KYB dampers first, was ok until one... -
For a new Honduh owner where do I get educated on VCM? Is Piloteers the best resource or is there a good FAQ or Wiki or something?
-
I don't think Honda is the same Honda ever since they started putting in turbo. Their strength was always the higher rpm engine with way...
-
Yesterday my neighbor's daughter was over to her folks for a BBQ with her 2 children and texted me about her 2016 Odyssey EX-L, 127K...
-
Number_35 reacted to HoosierJeeper's post in the thread 3.6 Pentastar purge valve/misfire issues with Helpful.
Not at idle - there is a rattle noise at low RPM I can hear with the windows down/music off so Im suspecting that's probably a failed...
-
Number_35 reacted to HoosierJeeper's post in the thread 3.6 Pentastar purge valve/misfire issues with Like.
Replace the intake cam for that bank and all rockers/followers on it.
-
Number_35 reacted to HoosierJeeper's post in the thread 3.6 Pentastar purge valve/misfire issues with
Haha.
how many other engines have a built in lathe to give you a custom cam grind? -
Number_35 reacted to The_Eric's post in the thread 3.6 Pentastar purge valve/misfire issues with Helpful.
Since it's RPM linked and only #5, do a relative compression test, maybe you've got a roller follower or cam lobe failing. I've got a...
-
-
Loading…
-
Loading…
