-
-
Mewbs replied to the thread Valvoline R&P 3K filter: grit and glitter.Did you start your car with the solvent contaminated oil after your piston soak to smoke it before changing your oil or did you change... -
Mewbs replied to the thread Valvoline R&P 3K filter: grit and glitter.Pretty sure that VRP 0W-20 has been tinned out from the start by left over solvents from your piston soak... Kinda dangerous.
-
I don’t see a question from you regarding your post. 1. “You like the local dealership 2. They seem honest, and 3. Do good work”...
-
2015 honda accord crosstour 2.4L K24 137k miles in service : unknown out/off: bull oil and VO-106 in/on: 5 quarts Valvoline R&P 5w-30...
-
Mewbs replied to the thread Pros/cons of Yamaha filter design?.Seems more like a depth filtration type media where that spongy style media try to capture as much particulate matter inside the medium...
-
Great ... thanks for the photos - was that so hard? Still looks like Denso ripped off the Purolator bypass valve design. You should...
-
I used it quite a bit back in the 2000s. It was widely used in professional motorsports back then. After the Calumet acquisition and...
-
Mewbs replied to the thread BG Products Trans Fluid.They have some good hardware I kinda want one. Other than their EPR flush and 44K which in my experience with my own vehicles, family...
-
Back when I was a tech I really liked the BG trans fluid exchange machine itself. Exchanges all the fluid. As far as the additives...
-
Yeah, I figure I have about 5 years of them at the rate I'm going currently, a bit depressing. Would like to find more, may scope out...
-
Mewbs replied to the thread 2x FRAM Titanium (OG Ultra media) FS2 C&P.Its depressing much decline of manufacturing pride we're seeing here these days. I'm glad to discover this place and your wisdom shared...
-
Mewbs reacted to funflyer's post in the thread 2 Toyota 90915-YZZN1 Cut Open - 4.5k mi / 30 minutes of BG EPR with
Sad.
Well here's another one that failed. This is one I installed 2K miles ago and decided to pull it today as I do not trust these filters... -
Mewbs replied to the thread 2 Toyota 90915-YZZN1 Cut Open - 4.5k mi / 30 minutes of BG EPR.Unfortunate that you encountered this problem too. Seems like they're press fitting these center cores into the media that molded glue...
-
A Blackstone type UOA is too insensitive to see any good wear trends vs oil viscosity used. - it can only see particles 5u microns and...
-
Off an inline filter mount in transmission cooler line on my Ram 1500. 30,700 miles. Replaced it with a pH8 for now. Sending a sample in...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
