Good Afternoon Folks,
Thought I would post these, with the following details:
1. Mfg: Fram Ultra Guard, XG16
2. Can Caliper: 0.03-0.325"
3. In Service: 6 months, 3000 miles
4. Core: Holes, not louvers
5. Media: No tears or rips; a section of media w/wide spacing; filter media securely in place with end caps.
6. Leaf Spring: Nothing notable.
7. Silicone Valve: Pliable, no issues; oil in the can.
8. Removal: No issues, used a cap.
9. New Install: Fram TG16
I have the individual components if anyone has questions that may require looking at the filter again.
Enjoy!
RevRider
Thought I would post these, with the following details:
1. Mfg: Fram Ultra Guard, XG16
2. Can Caliper: 0.03-0.325"
3. In Service: 6 months, 3000 miles
4. Core: Holes, not louvers
5. Media: No tears or rips; a section of media w/wide spacing; filter media securely in place with end caps.
6. Leaf Spring: Nothing notable.
7. Silicone Valve: Pliable, no issues; oil in the can.
8. Removal: No issues, used a cap.
9. New Install: Fram TG16
I have the individual components if anyone has questions that may require looking at the filter again.
Enjoy!
RevRider
Attachments
-
P8200177.JPG96.9 KB · Views: 117
-
P8200178.JPG54.7 KB · Views: 97
-
P8200179.JPG52.3 KB · Views: 96
-
P8200180.JPG89.3 KB · Views: 145
-
P8200181.JPG140.3 KB · Views: 151
-
P8200182.JPG137.2 KB · Views: 151
-
P8200183.JPG145.1 KB · Views: 138
-
P8200184.JPG142.4 KB · Views: 133
-
P8200185.JPG139.6 KB · Views: 128