This is my uoa vino 125, 3382.0 miles, 1382 miles on oil.
Ridden in traffic in town, at 45mph or less.
FE 12.0, PB 4.0, CU 15, CR 3.0, AL 3.0, NI 0.0, AG 0.0 SN 2.0, SI 8.0 B 201.0, NA 4.0. Fuel dilution 0.00%. Total solids 0.00%. Water content 0.00%. Viscosity, saybolt table SUS @ 210 F 55.100, this was yamalube 10w40. Is this good or bad? I have switched to Mobil 1 10w30.
Ridden in traffic in town, at 45mph or less.
FE 12.0, PB 4.0, CU 15, CR 3.0, AL 3.0, NI 0.0, AG 0.0 SN 2.0, SI 8.0 B 201.0, NA 4.0. Fuel dilution 0.00%. Total solids 0.00%. Water content 0.00%. Viscosity, saybolt table SUS @ 210 F 55.100, this was yamalube 10w40. Is this good or bad? I have switched to Mobil 1 10w30.