2004 Ford Ranger Windshield Washer Nozzles.

[S2500Dog]

Hello everyone,

I need to replace the passenger side windshield washer nozzle for my 2004 Ford Ranger. I have tried cleaning it with compressed air and various sewing needles but the nozzle is still completely clogged. Does anyone have any photos, videos, or instructions on how to remove/install the passenger side washer nozzle for the 2004 Ford Ranger? Thank you for all of your help.

 

[01rangerxl]

Just pry it out carefully with whatever you can work underneath it without tearing up the paint. They just snap in with plastic tabs. If you cannot get it out that way, removing the computer might give you enough room to squeeze the tabs in from below, but that really shouldn't be necessary. They should pry out from the top without much of a fight. Have the new one ready so you don't drop the hose into the cowl.

FYI, the aftermarket replacements are pretty bad. They just shoot a narrow stream on to the windshield/roof, it doesn't fan out like the OE ones.

 

[S2500Dog]

Thank you for the info. I will order the exact OEM washer nozzle from www.fordparts.com through my local AutoNation Ford dealer. It's only about $12 total for the part.