Recent Topics
How does this sound ?
by Ammofirst
09/22/17 07:10 PM
2014 Taurus low coolant
by cadfaeltex
09/22/17 07:08 PM
VOA for Pennzoil 5w-30?
by MikeB4rsk
09/22/17 07:06 PM
warning! 2006 mitsubishi outlander fuel pump repla
by kc8adu
09/22/17 07:04 PM
Mobil 1 AP 5w20 - 9,822mi 2014 Jeep GC HEMI
by mike718
09/22/17 06:57 PM
Puerto Rico aftermath
by madRiver
09/22/17 05:39 PM
Tires wear out faster when new?
by 2010Civic
09/22/17 05:05 PM
Fram Ultra now rated up to 20K miles?
by Matagonka
09/22/17 04:55 PM
Service Department Just Lied to My Face
by fenixguy
09/22/17 03:43 PM
a $79 appliance bulb
by chiefsfan1
09/22/17 03:20 PM
Castrol Edge Bio-Synthetic on Sale
by bigj_16
09/22/17 03:04 PM
Using up boat fuel
by otis24
09/22/17 02:51 PM
Recently retired after almost 26 years on the job.
by wtd
09/22/17 02:06 PM
One size fits all
by zipster
09/22/17 02:04 PM
Do you flush your power steering system?
by Diesel16
09/22/17 12:59 PM
Diesel P/U's Coal Smoking It from Stop Lights
by LoneRanger
09/22/17 12:51 PM
GM Oil Life Monitor - OCI With Synthetic
by ChrisD46
09/22/17 12:18 PM
adjust briggs clutch spring
by edwardh1
09/22/17 11:29 AM
6000 SYNSHIELD MAX MPG SAE 10W - 30 API FA - 4
by bigj_16
09/22/17 10:44 AM
Front differential fluid capacity for 2004 A4
by dlundblad
09/22/17 07:56 AM
Newest Members
shuvo, angelcar, ickkyi, JoV, fiat124
62906 Registered Users
Who's Online
101 registered (aba4430, 01rangerxl, 5AcresAndAFool, Ammofirst, Aichiguy, AandPDan, 12 invisible), 2037 Guests and 15 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
62906 Members
66 Forums
271235 Topics
4498481 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Page 1 of 2 1 2 >
Topic Options
#4275626 - 12/15/16 04:46 PM 2012 Ram 2500 6.7L Cummins-1st UOA
Palehorse24 Offline


Registered: 01/25/16
Posts: 4
Loc: Lower Alabama
All,

First ever report on this truck. I bought the truck used with 16000 miles and it is completely stock, except for a drop-in K&N air filter. Did my first oil change with Rotella T 15W-40 and all since with Valvoline Premium Blue 15W-40 and K&N HP 4003 oil filter. I sent the sample due to the EVIC notice of "Oil Change Due" not exceeding 2500-3000 miles and want to see if I can safely extend the OCI to 5000-7500 miles without excessive fuel dilution. The high iron numbers and low viscosity (while not an issue according to Blackstone) has me slightly concerned. Truck is used mainly for mixed highway/city driving back and forth to work (15 miles each way) and occasionally I pull a 7000 lb. travel trailer. Any advice or basis for my concern??


Edited by Palehorse24 (12/15/16 04:47 PM)

Top
#4275643 - 12/15/16 05:02 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
bullwinkle Offline


Registered: 10/09/04
Posts: 6777
Loc: Cincinnati, OH, USA
Viscosity & flashpoint way down, fuel pretty high at 1.5%-I personally wouldn't be pushing it any further than you are now. Is the oil level increasing as you drive it? Do you do any longer highway runs (to help with excess DPF regeneration)? At least the K&N filter isn't allowing a lot of Si in. I definitely would be running samples regularly, for sure.
_________________________
06 Ram 3500 CTD 4X4(FG Venturi), 93 GMC C3500 6.2, 89 F-450 7.3, 98 XJ 4.0(XG8A), 05 xB(XG3600), 15 Transit 3.7, 03 Merc Grand Marquis 4.6 2V(XG2)

Top
#4275677 - 12/15/16 05:45 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
DoubleWasp Offline


Registered: 05/21/12
Posts: 4470
Loc: Fort Lauderdale, FL
Maybe there are things that just don't show up in a UOA, but that oil does not seem to have a whole heck of a lot going on. Might try switching to a stouter oil.
_________________________
2007 Lincoln Navigator M1 0w-40/FU
1968 Charger R/T / Supercharged 440 VR1/DBL7349
2007 Ram 3500 4x4 / Cummins 6.7 /DBL7349
2015 Porsche 911 C4S PDK

Top
#4275712 - 12/15/16 06:21 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
Donald Offline


Registered: 03/21/04
Posts: 19213
Loc: Upstate NY
I would consider Rotella T6. I have used both T and T6. I think you will be changing this oil based upon fuel dillution. I could go 18k on Rotella T6 with my 1999 Dodge Ram diesel.

Dump the K&N air filter, get a good one.
_________________________
2015 Subaru Forester 2.5 engine/CVT
2015 Ford F250 w/Powerstroke
2016 Subaru Crosstrek CVT (wife's)


Top
#4275762 - 12/15/16 07:15 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
roadrunner1 Online   content


Registered: 04/08/09
Posts: 1238
Loc: oh
Doesn't this model year predate the use of urea in the 6.7 Dodge? If so that explains why the the oil is showing excessively low viscosity for such low miles, a 5w-40 would have sheared even worse here and probably wouldn't have helped with the FE either. 1.5% fuel isn't anything to worry about as it could have been attributed to how the sample was drawn.

Your FE is higher than it should be, but not crazy high, I'd be more concerned with the low viscosity as its nearing the low end of a 30wt.
_________________________
'15 F350 6.7

Top
#4275856 - 12/15/16 08:35 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
A310 Offline


Registered: 04/16/15
Posts: 234
Loc: Kelowna, BC, Canada
If you want to keep your emissions system intact and know when it's trying to regen (which is most likely why our fuel dilution is 1.5%) I would install an edge CTS or equivalent to monitor the engine parameters. You can monitor soot levels in the DPF and EGT's etc to know when to expect a regen. It's important to complete the regens so they don't keep trying to clean out the DPF due to incomplete regens. I use this on my wife's Jeep diesel and works great. Just my 2 cents worth, but this is in part why I deleted my 2009 Ford 6.4 Powerstroke.

Top
#4276459 - 12/16/16 01:48 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Donald]
Balrog006 Online   content


Registered: 08/09/16
Posts: 290
Loc: West Michigan
Originally Posted By: DoubleWasp
Maybe there are things that just don't show up in a UOA, but that oil does not seem to have a whole heck of a lot going on. Might try switching to a stouter oil.

M1Delvac 5w40.

Originally Posted By: Donald
...
Dump the K&N air filter, get a good one.

This!
_________________________
06 MDX 197K+ Mobil S 0w20, A01
08 CRV 250K+ VSyn w/ML, A01
04 JD L130 700H, Mobil S 5w30
13 JD 2032r 285H, JD Plus 50 ii 15w40
M1Delvac 5w40 in OPE

Top
#4276495 - 12/16/16 02:30 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Donald]
Palehorse24 Offline


Registered: 01/25/16
Posts: 4
Loc: Lower Alabama
Thanks for the reply, but you've brought up a couple things that I would like to expand on. First, isn't T6 the synthetic 5W-40? If so, realize that I live in southern Alabama and I would think that the 15W-40 would be more appropriate based on the OEM recommendation and the high temperatures here. The 2012 is the last year that Ram did not require DEF. With that being said the EGR and DPF on the 2012 is considerably different than the emissions equipment on the 1999 Ram 5.9L Cummins, which would drastically affect the oil contamination and life. I can't imagine making it 18k on a stock 2012 Ram, but I may be very wrong. As stated in my original post, this is the first oil analysis on this truck and it is also my first diesel, so I'm not near as familiar with diesel details as those of a gas engine.

As far as dumping the K&N, why and what do you recommend as a "good one".

Thanks again for the help.

Top
#4276498 - 12/16/16 02:32 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: roadrunner1]
Palehorse24 Offline


Registered: 01/25/16
Posts: 4
Loc: Lower Alabama
Roadrunner- You are correct. No DEF, but I don't understand the viscosity readings and the relation to the lack of DEF. I'm saying that as an uneducated 1st time diesel owner, not sarcastically.

Top
#4276503 - 12/16/16 02:36 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
roadrunner1 Online   content


Registered: 04/08/09
Posts: 1238
Loc: oh
The aftermarket air filters generally allow too many contaminates through vs. stock and aren't needed for any power gains. For your locale I would stay with a 15w-40 as a 5w-40 will shear even more in your application.
_________________________
'15 F350 6.7

Top
#4276666 - 12/16/16 06:08 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
jayg Offline


Registered: 10/04/12
Posts: 1081
Loc: Talkeetna, AK
Keep your K&N, clean and oil it every 50k miles and you'll be fine. The bad reputation comes from idiots over oiling them and destroying MAF sensors. You don't have to worry about that.


Your DPF should be getting cleaned plenty while towing that trailer. If I were you I'd run Maxlife Heavy Duty Diesel 15w40, get an Edge or something similar just to maintain vitals and cruise over next door to the Beau Rivage. grin
_________________________
'15 Toyota Prius C TGMO 0w20
'87 Toyota Land Cruiser FJ60 4sp PPHM 5w30
'73 Datsun 240Z 4sp Vintage QS 10w40 from '73 in the sump



Top
#4278916 - 12/19/16 07:11 AM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
Bighorn2500 Offline


Registered: 05/24/16
Posts: 206
Loc: Michigan, USA
Get an oil with a more stout additive pack like Delo or Mobil Delvac 1300. These engines like Zinc, Moly and Boron in the oil manufactures additive pack to reduce wear on components.

I've been running 5W40 Mobil 1 Delvac ESP in my Cummins with some extra ZDDP additive. My engine likes the 5w40 here in the Michigan winters. Started right up with remote this morning temp was (1) degree Fahrenheit, was not plugged in either.

If you are all stock with emissions intact, and with UOA stick with 6000-7000 mile change intervals. Too much fuel dilution other wise if you go longer. If you plan to delete the emissions then you can push oil changes out further 10K, 15K or more with UOA like previously stated.

Plain stock paper air filter works the best for me. It's your turbo, run what you want but I'd watch your silicone levels in your oil samples, if you notice it going up it may be due to pass through from poor filtering.


Edited by Bighorn2500 (12/19/16 07:16 AM)
_________________________
2012 Ram 2500 SLT 6.7L Cummins 4x4
2015 Jeep Cherokee 3.2L Latitude 4x4

Top
#4279164 - 12/19/16 12:56 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Bighorn2500]
Palehorse24 Offline


Registered: 01/25/16
Posts: 4
Loc: Lower Alabama
Originally Posted By: Bighorn2500
Get an oil with a more stout additive pack like Delo or Mobil Delvac 1300. These engines like Zinc, Moly and Boron in the oil manufactures additive pack to reduce wear on components.

I've been running 5W40 Mobil 1 Delvac ESP in my Cummins with some extra ZDDP additive. My engine likes the 5w40 here in the Michigan winters. Started right up with remote this morning temp was (1) degree Fahrenheit, was not plugged in either.

If you are all stock with emissions intact, and with UOA stick with 6000-7000 mile change intervals. Too much fuel dilution other wise if you go longer. If you plan to delete the emissions then you can push oil changes out further 10K, 15K or more with UOA like previously stated.

Plain stock paper air filter works the best for me. It's your turbo, run what you want but I'd watch your silicone levels in your oil samples, if you notice it going up it may be due to pass through from poor filtering.


Bighorn- Thanks for the info. On a side note, I initially ran Rotella 15W-40, but changed to the Valvoline Premium Blue, as it is recommended by Cummins and guarantees 5000 mile OCI. I know that it is mainly marketing, but figured that if my EVIC was wanting me to change at 2500 miles that I could at least have an argument if I had trouble later down the road as long as I stuck with the 5K OCI and the VPB. Will definitely keep an eye on the silicon going forward. Thanks again.

Top
#4279255 - 12/19/16 03:22 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
roadrunner1 Online   content


Registered: 04/08/09
Posts: 1238
Loc: oh
For your locale I would stick with 15w-40, no need for a 5w-40 as you never see cold-starts. I know the few years manufacturers offered diesels without DEF the regen process was extremely hard on oil/engines.

If you have a Deere dealer nearby you could try some Plus 50 II 15w-40, its more than likely cheaper than what you're using now and is formulated as an extended drain lube. I've been using it for over 25 years with outstanding UOA's.
_________________________
'15 F350 6.7

Top
#4279582 - 12/19/16 08:56 PM Re: 2012 Ram 2500 6.7L Cummins-1st UOA [Re: Palehorse24]
DoubleWasp Offline


Registered: 05/21/12
Posts: 4470
Loc: Fort Lauderdale, FL
You need K&N's other filter. AEM Dryflow:

_________________________
2007 Lincoln Navigator M1 0w-40/FU
1968 Charger R/T / Supercharged 440 VR1/DBL7349
2007 Ram 3500 4x4 / Cummins 6.7 /DBL7349
2015 Porsche 911 C4S PDK

Top
Page 1 of 2 1 2 >