Should i use a microfiber or terry bonnet?

[boostedtsiawd]

Im wondering which one will cut better since i have deep scratches and scuffs? Im using a 6" buffer orbits per minute 120v with meguairs rubbing compound but wondering which bonnet would be best to cut threw the scratches and scuffs faster?

This is the one im using= https://m.pepboys.com/product/details/9707065/00858

 

[Trav]

That machine isn't doing the job very well if at all no matter what you put on it.
Be very careful with deep scratches, you are not removing the scratches when you use compound you are removing the surrounding paint or clear coat, sometimes its better to live with a scratch than smoke the paint over a large area.
There are ways to minimize scratches with simple blending clear then a light buff rather than remove paint but you need to know what your doing to use this technique successfully, it makes the scratch almost invisible without cutting.

 

[Ramblejam]

You're not going to accomplish a [censored] thing with that.

http://www.harborfreight.com/6-in-57-amp-heavy-duty-dual-action-variable-speed-polisher-69924.html

Use one of their coupons, and that'll bring the price down considerably; in combination with a yellow (heavy cutting) pad and SMAT compound (Meguiars Ultimate), it's about the best you're going to do when factoring in the safety of a dual-action/foam pad combo.

 

[Vikas]

Answer to your actual question:- Terry bonnet would be better but as everybody else have told you the 6 inch wax spreader is going to do very minimal paint correction with Meguairs Ultimate Compound. Which car are you experimenting with?