If I have my AWD CX-9 on ramps for the rear axle and jack stands for the front - if I put it in neutral and rotate the front wheels by hand will the rear tires want to spin also?
I ask because I want to do a "good" vacuum and fill of it's transfer case and the service bulletin says to do a vac & fill 3x's while rotating the front wheels 3 rotations by hand in between each baccarat & fill. But this is on a lift in a shop. I'm a DYI'er in a garage.
My concern is safety and that even with chalking the rear wheels and having the parking brake engage that the car might want to roll when I try to rotate the front wheels by hand.
I ask because I want to do a "good" vacuum and fill of it's transfer case and the service bulletin says to do a vac & fill 3x's while rotating the front wheels 3 rotations by hand in between each baccarat & fill. But this is on a lift in a shop. I'm a DYI'er in a garage.
My concern is safety and that even with chalking the rear wheels and having the parking brake engage that the car might want to roll when I try to rotate the front wheels by hand.