Recent Topics
ATP AT-205 How does it work?
by FlyPenFly
08/16/18 01:01 PM
Valvoline Full synthetic
by S2K
08/16/18 12:48 PM
Jetta brake fluid swap
by rtrdad
08/16/18 12:41 PM
Relaxing music = increased livestock production?
by Ed_Flecko
08/16/18 12:19 PM
Amazing repairs
by SteveSRT8
08/16/18 12:01 PM
Unknown 0W/20 - 2015 Tahoe 5.3L - 6,467 mi
by E39LSMO
08/16/18 11:49 AM
GM is running their dexos licensing program in-house
by slacktide_bitog
08/16/18 11:29 AM
YES OR NO? PUP Dexos 1 Gen 2?
by jcartwright99
08/16/18 11:24 AM
Norton ConnectSafe being shutdown
by OVERKILL
08/16/18 10:24 AM
Aretha Franklin has passed away
by Char Baby
08/16/18 09:43 AM
PennzPlat 0W-20 mix/5890 mi./2017 Pentastar 3.6L
by doyall
08/16/18 08:57 AM
Ebay $5 off coupon no minimum some restrictions, ends 8/22
by BigD1
08/16/18 08:47 AM
Sainz to McLaren
by Brad_C
08/16/18 08:24 AM
5.4 3V Ford Triton Oil/carbon layer at spark plug
by tryamu
08/16/18 07:12 AM
Estimate on new porch (composite) - Thoughts?
by xBa380
08/16/18 06:46 AM
Valvoline Advanced Synthetic D1G2/5w30, 6,087MI, 09 Saturn
by smithph
08/16/18 06:45 AM
Automotive paint?
by Hemispheres
08/16/18 06:13 AM
I learned something new (historic info)!
by RyanY
08/16/18 05:46 AM
2015 Accord CVT Filter Change
by Stucker21trt
08/16/18 02:35 AM
Out, M1 0w-40, In PP 10w-30. Quiet
by wrcsixeight
08/16/18 01:39 AM
Newest Members
gtg, bsk, heyjobe, RockerSwitches, Jmoney7269
65724 Registered Users
Who's Online
83 registered (14Accent, 2015_PSD, 97f150, 2010Civic, Aero540T, 28oz, 10 invisible), 1728 Guests and 33 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
65724 Members
67 Forums
288806 Topics
4816988 Posts

Max Online: 3590 @ 01/24/17 08:07 PM
Donate to BITOG
Page 1 of 4 1 2 3 4 >
Topic Options
#4049698 - 03/26/16 07:08 PM Best Penetrating Oil for Rusted Automotive Fasteners?
SubLGT Offline


Registered: 01/31/06
Posts: 2648
Loc: Idaho
I have been using PB Blaster for dealing with moderately rusted automotive fasteners and rusted joints and splines. So far so good.

But are there better products out there, that every DIYer should have?

Top
#4049700 - 03/26/16 07:14 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Wolf359 Online   content


Registered: 04/27/12
Posts: 5031
Loc: MA
Kroil.

Top
#4049701 - 03/26/16 07:17 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: Wolf359]
JC1 Offline


Registered: 11/29/08
Posts: 3110
Loc: Oshawa, Ontario Canada
Mix of ATF and acetone.
_________________________
2015 Grand Caravan SXT Plus 5w-20 PPPP/Fram Ultra Filter
1997 Honda Civic CX 5w-30 Shell Conventional/Fram Ultra Filter

Top
#4049704 - 03/26/16 07:19 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: Wolf359]
mehullica Offline


Registered: 08/19/09
Posts: 569
Loc: Modesto,CA
Originally Posted By: Wolf359
Kroil.
+100


Edited by mehullica (03/26/16 07:19 PM)

Top
#4049718 - 03/26/16 07:31 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
KD0AXS Offline


Registered: 11/13/12
Posts: 2445
Loc: Nowthen, MN
+8643218764679 on Kroil.

Top
#4049726 - 03/26/16 07:45 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Rand Offline


Registered: 08/20/03
Posts: 12804
Loc: NE,Ohio
if kroil doesnt do it.. you usually need something more impressive... like a torch.
_________________________
2019 Jeep Cherokee Trailhawk 2.0T

Top
#4049739 - 03/26/16 08:03 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: mehullica]
spasm3 Offline


Registered: 05/30/10
Posts: 8865
Loc: North Carolina
Originally Posted By: mehullica
Originally Posted By: Wolf359
Kroil.
+100


Kroil is the best i've used.
_________________________
13 elantra 70k 5w30 QSUD
03 chevy avalanche79k synpwr 10w30
01 saturnsc1 185k synpwr rebuilt
17 mazda cx-5 5000 miles m1 0w30

Top
#4049745 - 03/26/16 08:09 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
bullwinkle Online   confused


Registered: 10/09/04
Posts: 7831
Loc: Cincinnati, OH, USA
Seafoam's Deep Creep has worked pretty well for me.
_________________________
06 Ram 3500 CTD 4X4(FG Venturi), 93 GMC C3500 6.2, 89 F-450 7.3, 98 XJ 4.0(XG8A), 05 xB(XG3600), 18 Transit 3.7, 03 Merc Grand Marquis 4.6 2V(XG2)

Top
#4049746 - 03/26/16 08:10 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: Wolf359]
Astro14 Offline


Registered: 10/10/10
Posts: 8668
Loc: Virginia Beach
Originally Posted By: Wolf359
Kroil.


+1
_________________________
32 Packard 15W40
02 Volvo V70 T5 0W40 M1
02 Volvo V70 XC 0W40 Edge
05 MB S600 0W40 M1
16 Tundra 1794 5W30 Valvoline

Top
#4049750 - 03/26/16 08:11 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
buck91 Offline


Registered: 04/17/12
Posts: 2501
Loc: West Michigan
Was never willing to pay the premium for kroil, finally broke down and bought a can last year. It really does seem significantly more effective than the pb blaster I used to use.

Liquid wrench works well, too. Not quite as effective as kroil.
_________________________
2011 F150 4x4 5.0L
1996 Mustang GT 5spd/ragtop

Top
#4049772 - 03/26/16 08:36 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
ejes Offline


Registered: 01/11/16
Posts: 321
Loc: Kansas
Kroil (Aerokroil) here as well. Have tried others (PB, WD-40, Liquid Wrench, etc.), but Kroil has always worked better.

Top
#4049780 - 03/26/16 08:42 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
rooflessVW Online   content


Registered: 12/24/11
Posts: 4569
Loc: North Carolina
ATF + acetone.
_________________________
"Zed's dead baby, Zed's dead."

Top
#4049788 - 03/26/16 08:47 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: rooflessVW]
CT8 Offline


Registered: 10/09/14
Posts: 11483
Loc: Idaho
Originally Posted By: rooflessVW
ATF + acetone.
+1
_________________________
"Don't let your preconceived notions get in the way of facts."
Geoff Metcalf

Top
#4049821 - 03/26/16 09:32 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
DerbyDave Offline


Registered: 10/27/15
Posts: 221
Loc: KS
On fasteners that permit it.. Copious amounts of heat
_________________________
1997 Ford Taurus
2007 Honda Ridgeline
2003 Suzuki GZ250
1986 Suzuki Cavalcade
2014 Nissan LEAF (Gone)

Top
#4049858 - 03/26/16 10:25 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Leo99 Offline


Registered: 03/30/14
Posts: 3151
Loc: NJ
I use the WD40 rust penetrant. It's a special kind of WD40.
_________________________
Without data you're just another person with an opinion. W. E. Deming

2003 Corolla 250,000 miles
2004 Rav4 359,000 miles
2015 Camry 59,000 miles

Top
#4049862 - 03/26/16 10:33 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
zrxkawboy Online   content


Registered: 11/30/04
Posts: 1784
Loc: SD
Conklin Rust Bomb
_________________________
"Think of all the Ford owners who will someday want an automobile." John Dodge


Top
#4049875 - 03/26/16 10:59 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Toaster_Jer Offline


Registered: 11/22/15
Posts: 285
Loc: Central Illinois - USA
Took a while to find it.

http://www.bobistheoilguy.com/forums/ubbthreads.php/topics/4012336/How_to_apply_ATF/Acetone_antis

Note also that “Liquid Wrench” is almost as good as “Kroil” for about 20% of the price.

Machinist’s Workshop Mag™ recently published some information on various penetrating oils that I found very interesting. Some of you might appreciate this. The magazine reports they tested penetrates for break out torque on rusted nuts.
They are below, as forwarded by an ex-student and professional machinist. They arranged a subjective test of all the popular penetrates with the control being the torque required to remove the nut from a “scientifically rusted” environment.

*Penetrating oil .......... Average load*
None ........................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster .................... 214 pounds
Liquid Wrench ............... 127 pounds
Kano Kroil .................... 106 pounds
ATF*-Acetone mix...............53 pounds

The ATF-Acetone mix was a “home brew” mix of 50 - 50 automatic transmission fluid and acetone.

Note the “home brew” was better than any commercial product in this one particular test.
Our local machinist group mixed up a batch and we all now use it with equally good results.
Note also that “Liquid Wrench” is almost as good as “Kroil” for about 20% of the price.
Steve from Godwin-Singer says that ATF-Acetone mix is the best and you can also use ATF- lacquer
thinner 50 - 50 mix

Top
#4049885 - 03/26/16 11:20 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Stewie Offline


Registered: 02/03/15
Posts: 1383
Loc: Maple Syrup Land
ATF and acetone.

Top
#4049939 - 03/27/16 01:57 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: buck91]
Wolf359 Online   content


Registered: 04/27/12
Posts: 5031
Loc: MA
Originally Posted By: buck91
Was never willing to pay the premium for kroil, finally broke down and bought a can last year. It really does seem significantly more effective than the pb blaster I used to use.

Liquid wrench works well, too. Not quite as effective as kroil.


If you buy it directly from Kanolabs.com, they have a buy one get one free offer so it's more like $6.75 a can plus shipping.

Top
#4050014 - 03/27/16 07:36 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Trav Offline


Registered: 11/20/06
Posts: 19634
Loc: MA, Mittelfranken.de
Kroil but for off the shelf stuff Liquid Wrench has been pretty good. The key to success with any of these products is allowing them plenty of wick time before tackling the fastener.
A good soaking left overnight or longer is probably the best.
_________________________
ASE L1, Master. Deutsch Meisterbrief.

Top
#4050398 - 03/27/16 05:02 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
The_Eric Offline


Registered: 03/31/10
Posts: 5355
Loc: Iowa
Torch or Mini-Ducter. If I need a lube, the ATF/Acetone.
_________________________
2005 Lincoln Aviator 4.6 DOHC
2000 Honda Accord 2.3
2001 Hyundai Elantra 2.0
1979 Ford F-150 351M

Top
#4051970 - 03/29/16 12:38 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
HerrStig Offline


Registered: 08/24/11
Posts: 9560
Loc: Boston, MA
IF ATF and whatever is so good, why isn't it sold over the counter?

Top
#4052790 - 03/30/16 10:42 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: HerrStig]
rooflessVW Online   content


Registered: 12/24/11
Posts: 4569
Loc: North Carolina
Because it is not a healthy mixture.

Breathing the vapors is not advisable.
_________________________
"Zed's dead baby, Zed's dead."

Top
#4068946 - 04/14/16 10:13 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Errtt Offline


Registered: 11/14/10
Posts: 2813
Loc: California
Have switched from PB to Kroil. Kroil is my new favorite.

Top
#4072560 - 04/18/16 03:34 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
andyd Offline


Registered: 09/25/04
Posts: 7432
Loc: Marshfield , MA
I mixed up a 50/50 mix of ATF and gas. Seemed to work ok. #2 fuel oil is pretty creepy stuff too.
_________________________
'16 Camry LE STP synth 0w20 and STP filter. the Fridge

1994 Ranger ,the Rat, 5w30 dino, STP filter

'16 Camry SE, Valvoline HM 0w20 and OEM filter
Thick oil is better grin2

Top
#4072688 - 04/18/16 06:40 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
mjoekingz28 Offline


Registered: 11/21/07
Posts: 3996
Loc: United States of America
Didnt the old timers melt a stick of wax on the problem threads?

Top
#4073478 - 04/19/16 03:31 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
UltrafanUK Offline


Registered: 04/18/16
Posts: 985
Loc: England
If something cheap like WD40 after heating fails, i would try one of the Liqui Moly sprays:

http://www.liqui-moly.de/liquimoly/produ...voiladb=web.nsf

CRC also make a few similar products.
_________________________
Shell Ultra 0 or 5w40 or Liqui Moly 5w40 plus Ceratec every long OCI.
LM idle flush every 100K km.

Top
#4076441 - 04/22/16 12:33 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Vikas Online   content


Registered: 07/22/05
Posts: 11304
Loc: NorthEast
Is it better to spray on hot parts or on cold parts for soaking?

Also somebody (CRC ?) makes Freeze Off? How is that one?

Top
#4076462 - 04/22/16 01:06 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
thescreensavers Offline


Registered: 12/21/09
Posts: 450
Loc: Jupiter, FL
Liquid Wrench because it smells good and can find it cheaply locally and finally it did pretty well on the test posted above.
_________________________
2017 Camaro SS 1LE (Motul 8100 X-clean 5W40)
1997 Jeep XJ 4x4 (15W40 HDEO Maxlife)

Top
#4081645 - 04/27/16 11:55 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
BigD1 Offline


Registered: 08/12/15
Posts: 2623
Loc: NC
I had a can of Kroil for years that worked good, but man that smell just will not go away. My brother needed some penetrating fluid for a mower he was working on, so I gave him the little bit that was left. Bought a can of Liquid Wrench, and it has been working very good, and does not stink like the Kroil.

I used Kroil on some nuts on a strut tower that was inside of my trunk, and it took over a week before the smell toned down inside of the car, and that was leaving the trunk open to air out too.
_________________________
1992 Toyota Pickup--Formula Shell 10W-30--Fram PH3614

Top
#4096184 - 05/13/16 09:12 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
donvalley Offline


Registered: 02/18/15
Posts: 32
Loc: Toronto, Ontario
Tried several of the brand name penetrating oils, but found that ATF + Acetone (50/50) worked the best for me.

Top
#4101351 - 05/19/16 08:34 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: Wolf359]
Gillsy Offline


Registered: 12/09/07
Posts: 345
Loc: Owego, New York
Originally Posted By: Wolf359
Kroil.
I'll up the ante one. My fav is SiliKroil (Kriol w silicone).
_________________________
Many are the afflictions of a righteous man

2018 F150 Supercab 2.7 Ecoboost 4x4
400 lbs/ft of grin at 2750 RPM
2016 Kawasaki 650 Versys LT

Top
#4172992 - 08/09/16 05:28 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
hyperscion Offline


Registered: 11/14/09
Posts: 132
Loc: oklahoma
Penetro 90.
Made by Schaeffers, is good stuff,it has helped me several times.

Top
#4178482 - 08/15/16 09:50 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: Gillsy]
buck91 Offline


Registered: 04/17/12
Posts: 2501
Loc: West Michigan
Originally Posted By: Gillsy
Originally Posted By: Wolf359
Kroil.
I'll up the ante one. My fav is SiliKroil (Kriol w silicone).


2nd. Very rarely has this not done the trick, even up here in the Salt belt.
_________________________
2011 F150 4x4 5.0L
1996 Mustang GT 5spd/ragtop

Top
#4182273 - 08/20/16 03:42 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
car51 Offline


Registered: 03/12/15
Posts: 10503
Loc: Southwest PA
PB Blaster works well for stuff I work on
_________________________
2009 Toyota Camry LE

Top
#4183504 - 08/22/16 09:39 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: Gillsy]
HerrStig Offline


Registered: 08/24/11
Posts: 9560
Loc: Boston, MA
Originally Posted By: Gillsy
Originally Posted By: Wolf359
Kroil.
I'll up the ante one. My fav is SiliKroil (Kriol w silicone).
+1

Top
#4183815 - 08/22/16 03:46 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
AMC Offline


Registered: 10/17/10
Posts: 907
Loc: South Eastern, CT
I have tried a lot of them as well. Kroil seems to work the best for me.

Liquid wrench would probably be my second place. The ATF/Acetone mix didn't seem to be that great. Although the foaming, bubbling, aerosol action of the commercially made stuff does seem to help and maybe that gives it an advantage.
_________________________
18 Honda CR-V - Factory Fill
17 Ram 1500 SLT - Napa Synthetic 5w-20
14 Yamaha Super Tenere - Delvac 15w-40

Top
#4184057 - 08/22/16 09:33 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
DP78 Offline


Registered: 08/22/16
Posts: 30
Loc: United States
GM heat riser lubricant. Although heat risers don't really exist anymore. It's a graphite based lubricant. It's important to shake well before spraying. I've soaked rusted to nothing bolts over night in a cap filled with it. Ate all the rust off and left the bolt usable.

Top
#4185149 - 08/24/16 06:42 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: DP78]
Kira Offline


Registered: 08/19/10
Posts: 5548
Loc: Champlain/Hudson Valley
I'm emptying my can of Liquid Wrench and using my Kroil (my brother went to Nashville so NO SHIPPING!)
I always;
APPLY
HIT WITH WIRE BRUSH
REAPPLY
SEE YA TOMORROW

Blows my mind (not difficult) to see people spray then reach for a wrench. What are they thinking? This stuff ain't magic.

Top
#4186899 - 08/26/16 09:38 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
HerrStig Offline


Registered: 08/24/11
Posts: 9560
Loc: Boston, MA
I have a well made little Westwood window fan. It had always made a slight dinging noise I couldn't cure, despite trying light Si grease, Mobil !, Rem oil for firearms, and some general purpose Tuffoil. One day, since my Kriol was nearby I gave both bearings a shot of Kriol. The noise went away. I thought: " This can't last". It's been a month, the fan runs 24/7 in hot weather and it's still quiet. Don't quite know waht to make of it.


Edited by HerrStig (08/26/16 09:40 AM)

Top
#4186912 - 08/26/16 09:59 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
buck91 Offline


Registered: 04/17/12
Posts: 2501
Loc: West Michigan
Maybe the grease was getting dry and the kroil "re-wetted" it. I've done this before on light applications with Triflow and it has worked very well!
_________________________
2011 F150 4x4 5.0L
1996 Mustang GT 5spd/ragtop

Top
#4186987 - 08/26/16 11:24 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
HerrStig Offline


Registered: 08/24/11
Posts: 9560
Loc: Boston, MA
I'm going to research sintered "oilless" electric motor bearings and see what I can learn. You might be right.

Top
#4189675 - 08/29/16 02:01 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
Jetronic Offline


Registered: 02/27/09
Posts: 3653
Loc: down in the park
wouldn't a thin MT fluid work even better than ATF when combined with acetone? the viscosity of about 6-7 cst is more or less the same, but the Phosphor content is likely higher?
_________________________
AR Giulietta 2.0 JTDM-2 -- Total Quartz 9000 Energy 0w30
Hankook Ventus Prime 2 215/50R17 (front)
Pirelli P7 Cinturato 225/45R17 (rear)

Top
#4191213 - 08/31/16 01:14 AM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: SubLGT]
jkhawaii Offline


Registered: 06/03/05
Posts: 502
Loc: Oahu
JB 80

Top
#4214578 - 09/29/16 06:33 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: Leo99]
lancelot50 Offline


Registered: 09/29/16
Posts: 23
Loc: indiana
I tried deep creep about a year ago.it works far better than pb blaster.ill have to look for some kroil.

Top
#4215434 - 09/30/16 07:04 PM Re: Best Penetrating Oil for Rusted Automotive Fasteners? [Re: Toaster_Jer]
bioburner Offline


Registered: 09/19/16
Posts: 1418
Loc: Minnesota
Originally Posted By: Toaster_Jer
Took a while to find it.

http://www.bobistheoilguy.com/forums/ubbthreads.php/topics/4012336/How_to_apply_ATF/Acetone_antis

Note also that “Liquid Wrench” is almost as good as “Kroil” for about 20% of the price.

Machinist’s Workshop Mag™ recently published some information on various penetrating oils that I found very interesting. Some of you might appreciate this. The magazine reports they tested penetrates for break out torque on rusted nuts.
They are below, as forwarded by an ex-student and professional machinist. They arranged a subjective test of all the popular penetrates with the control being the torque required to remove the nut from a “scientifically rusted” environment.

*Penetrating oil .......... Average load*
None ........................... 516 pounds
WD-40 ..................... ... 238 pounds
PB Blaster .................... 214 pounds
Liquid Wrench ............... 127 pounds
Kano Kroil .................... 106 pounds
ATF*-Acetone mix...............53 pounds

The ATF-Acetone mix was a “home brew” mix of 50 - 50 automatic transmission fluid and acetone.

Note the “home brew” was better than any commercial product in this one particular test.
Our local machinist group mixed up a batch and we all now use it with equally good results.
Note also that “Liquid Wrench” is almost as good as “Kroil” for about 20% of the price.
Steve from Godwin-Singer says that ATF-Acetone mix is the best and you can also use ATF- lacquer
thinner 50 - 50 mix

Looks like the same list the American blacksmiths guild did a few years ago
_________________________

97 Ford E350 D,99 F350 dually D
13 Scion Xb
12 Ford Transit Connect
06 Nissan Xterra
03 K1200 BMW
07 Kawasaki KLR650
13 Madass

Top
Page 1 of 4 1 2 3 4 >