Additive Frenzy - FP60 and Techron after winter storage?

Status
Not open for further replies.
Joined
May 13, 2004
Messages
440
Location
Toronto, Canada
Sorry in advance. I did search but did not find anything specifically on point.

I use FP60 regularly in my cars with every fill up at about 1.5 times the recommended dose.

I just pulled my Porsche out of winter storage. I had changed the oil and added Fuel Power to a full tank of 91 AKI gas as a stabilizer. I ran through that tank and added about a quarter tank of Sunoco Ultra 94 (which is 10% ethanol around here) just as a paranoid water remover thing.

I have one bottle of Chevron Techron left. You can't find it here in Canada so I was saving it. I was planning on running it around now both as a once or twice a year cleaner, and in case it does something useful after winter storage.

Obsessive?

Redundant?

Counter-productive?

Thoughts?
 
Well,

With all due respect, using 1.5 times the recommended dose is probably a waste of money, though I'm sure "LCD" doesn't mind.

As for using the Techron, it's good stuff, but I do not believe it's needed based on your regular usage of FP60. It won't hurt to use the Techron if you're looking to get rid of that last bottle. Just lay off the FP60 for that tankful, then go back to FP60.
 
Status
Not open for further replies.
Back
Top