Been using somewhat junky jumper cables for a long time and I am tired of it. So time to get new , well built jumper cables.
2 x 7.5' #2 AWG cables with an Anderson SB350 connector on one end and 400 amp clamps on the other
2 x 7.5' 2/0 cables with a slave plug on one end and an SB350 connector on the other end
1 set of 10' 2/0 cables with SB350 connectors on both ends
With this setup I can jump anything I own. I can use the clamps or the nato plugs for 12v or 24v setups at 15 feet. If I add the connector cable I can do 25 feet which should be more than plenty. I can even plug straight into the anderson connectors on my growler.
Old jumpers, served me well over the years but showing their age and are hard to use on my gensets.
New setup
Nice clamps on these
2 x 7.5' #2 AWG cables with an Anderson SB350 connector on one end and 400 amp clamps on the other
2 x 7.5' 2/0 cables with a slave plug on one end and an SB350 connector on the other end
1 set of 10' 2/0 cables with SB350 connectors on both ends
With this setup I can jump anything I own. I can use the clamps or the nato plugs for 12v or 24v setups at 15 feet. If I add the connector cable I can do 25 feet which should be more than plenty. I can even plug straight into the anderson connectors on my growler.
Old jumpers, served me well over the years but showing their age and are hard to use on my gensets.
New setup
Nice clamps on these