I broke the clip on the electrical connector to the vvt intake solenoid and now it wont stay on. Where ca. I get one and how to I connect it?
Where to find electrical connector?
- Thread starter hardcore302
- Start date
- Status
Give Stoystown auto wreckers a call, their phone number is 18003588770. Take a look at the air view on their web site. Stoystown is a huge junk yard. They will UPS the part to you.
Last edited:
2011 equinox 2.4
Can you post a picture?
Might have to wait till tomorrow.
How can I keep it on without reolacing the broken tab? NOTHING for a zip tie to connect to...
How can I keep it on without reolacing the broken tab? NOTHING for a zip tie to connect to...
If I use rtv sealant, is it permanant? Could I remove the connector in the future if I had to once I used the sealant, or would it be like super glue?
use a dab of silicone on the outside.
What do u mean on the outside? Thank u
Could another name for it be the Camshaft Position Solenoid Connector?
If so, NAPA has it and the part number is ECH EC985
If so, NAPA has it and the part number is ECH EC985
Wire strippers and a soldering iron if you can't do it any other way
Tried duct tape yet?
And if you get a temp. fix going, RockAuto sells connectors. And if they don't have what you need, try www.car-part.com
And if you get a temp. fix going, RockAuto sells connectors. And if they don't have what you need, try www.car-part.com
I keep an assortment of heat shrink tubing in my electrical kit for things like this. Slide a piece over the whole connector and flick the bic.
- Status
