Update on Valvoline full Synthetic

Status
Not open for further replies.
Joined
May 12, 2008
Messages
6,318
Location
Canton, GA
Just an update on the Valvoline full Synthetic racing oil I used in my Cub Cadet Lt-1046 20hp Kohler Courage V-twin.It is very smooth on this oil so far.And I might keep using it,seems to be holding up very well.
 
Last edited:
Joined
Apr 18, 2008
Messages
1,093
Location
Kentucky
Valvoline Synthetic VR-1 40C-64 100C-10.5 HTHS-3.0 TBN-8 Zinc-1400 Phos-1300 Calcium-1910 Sodium-490 SL Valvoline Synthetic Raceing 40C-60.81 100C-10.2 HTHS-3.0 TBN-6 Zinc-1200 Phosphorus-1200 Calcium-?...Probably none Sodium-240 not rated
 
Last edited:
Joined
Jul 20, 2008
Messages
931
Location
Michigan
 Originally Posted By: FrankN4
Valvoline Synthetic VR-1 40C-64 100C-10.5 HTHS-3.0 TBN-8 Zinc-1400 Phos-1300 Calcium-1910 Sodium-490 SL Valvoline Synthetic Raceing 40C-60.81 100C-10.2 HTHS-3.0 TBN-6 Zinc-1200 Phosphorus-1200 Calcium-?...Probably none Sodium-240 not rated
So the "Racing formula" is non-detergent?
 
Last edited:
Joined
Apr 18, 2008
Messages
1,093
Location
Kentucky
The PDF only shows 240 PPM of sodium. It doesn't show any calcium. There may be "something" that isn't listed on the PDF, but look at that TBN, ONLY 6 This is an oil for race applications and would be changed probably after each race.
 
Status
Not open for further replies.
Top