UOA and viscosity

Status
Not open for further replies.
Joined
Sep 12, 2002
Messages
2,259
Location
SE MI
Can they determine viscosity at -10F to -5F, 40C, and 100C for UOAs?

It seems to me all they list for the majority of UOAs is the 100C viscosity.
 
I know the lab Patman uses, Wearcheck I beleive, will do viscosity @40 C if asked. Blackstone's reports also offer a blank for this information, so I'd assume tey can also do it if asked.

As for testing at -10 to -5F, I'm doubtful any of our regular UOA companies would offer that service, as that is not a "standard" testing point for viscosity.
 
Originally posted by MNgopher:
[QB] I know the lab Patman uses, Wearcheck I beleive, will do viscosity @40 C if asked. Blackstone's reports also offer a blank for this information, so I'd assume tey can also do it if asked.

As for testing at -10 to -5F, I'm doubtful any of our regular UOA companies would offer that service, especially given the fact you'd be swtiching tests to the CCS and MRV tests at cold temps.
 
Status
Not open for further replies.
Back
Top