Thoughts after installing a rear set of 40mm Lowering Springs in Transit Connect

[LostInTransit]

Want to know more about how easy or difficult it was to fit a custom set of coil springs on a Transit Connect? find out here: https://www.eng-tips.com/threads/follow-up.525135/

 

[LostInTransit]

Hoping Sat morning we'll be installing the Monroe struts and Godspeed end links.. then we can finally say the van is ready for track day.. But we'll take a short 10 hour trip to my buddy shop in eastern North Carolina so he can install the front sprilitter.. been waiting for this for almost 2 years.

I had some chrome blue foil wrap left over so I added some thin chrome blue lines at the base or cutting edge of the splitter..

 

[Dave9]

Edit: just no.

 

[LostInTransit]

Edit: Just Ignore..

 

[LostInTransit]

We're going to wait with the installation of the new monroe struts until a later date and proceed with the Godspeed end links instead. while I'll have the shop tech changing the end links I'll have him grease the upper and lower front spring seats as we've been getting some squeaking when turning the steering wheel left or right.

 

[LostInTransit]

Welp went to the shop this morning and it wasn't for the struts or end links as I've schedules Bigben to do this for us. Went to the shop this morning to have them get rid of the BG products trans fluid as it's not holding up. did a flush and fill with the Valvoline Dexron VI/Mercon LV ATF. so far so good..