Remington Fieldmaster problem...

Status
Not open for further replies.
Joined
Sep 14, 2011
Messages
142
Location
Denver, CO
So my boss gave me an old Remingtion Model 121 to clean up, but I now have a problem. I have put it back together and the bolt will not fit snug when you "cock" it. The teeth that interlock with the bolt and the upper receiver are sliding out from one another. I don't know if it was this way before I took it apart. Any suggestions, would a new bolt work? Here is a pic of what I am talking about see how its not fitting right?
confused.gif

[img:left][img=http://s9.postimg.org/x10hiqm8b/20141020_224108_1.jpg][/img]
 
One can assume the barrel is fully seated in the receiver? Looks that way in the picture. There may be some U-tube instructional video to watch.

Maybe take it apart again and try to reassemble. If that fails bag it up and take it to a qualified gunsmith. It may be due for a function/safety check anyway.
 
Also, the guys at shotgunworld.com should be able to get you on the right track. They eat, sleep, and dream shotguns, some do anyway.
 
Status
Not open for further replies.
Back
Top