Dont know how to post a report so ill just list out the important information. I have 5K on the oil and 20K on the vehicle
Aluminum 3
Chromium 1
Iron 28
Copper 7
Lead 0
Tin 0
Silicon 13
SUS Viscosity @210 = 56.8
cSt @100 = 9.29
Flashpoint = 400
Fuel % = < .5
Insolubles = .3
TBN = 2.2
This car is used by my wife mostly taking kids to school ect. We did have one 800 Mile round trip on this oil sample. Iron is a little high and im surprised that the viscosity was down to almost 9 cSt. That said, Silicon looked good and fuel dilution and fuel looks really good so im happy about that. Ill probably stick to about the same mileage for OCI and sample again at about 40K miles. I am curious to how a dino 5w30 would have held up. We do pay special attention to getting Top Tier gas and i use chevron supreme fuel cleaner every 5K miles.
Aluminum 3
Chromium 1
Iron 28
Copper 7
Lead 0
Tin 0
Silicon 13
SUS Viscosity @210 = 56.8
cSt @100 = 9.29
Flashpoint = 400
Fuel % = < .5
Insolubles = .3
TBN = 2.2
This car is used by my wife mostly taking kids to school ect. We did have one 800 Mile round trip on this oil sample. Iron is a little high and im surprised that the viscosity was down to almost 9 cSt. That said, Silicon looked good and fuel dilution and fuel looks really good so im happy about that. Ill probably stick to about the same mileage for OCI and sample again at about 40K miles. I am curious to how a dino 5w30 would have held up. We do pay special attention to getting Top Tier gas and i use chevron supreme fuel cleaner every 5K miles.