Originally Posted By: Rohan
Originally Posted By: Gasbuggy
Originally Posted By: Rohan
I know most of you are telling me to fix the gaskets and seal. I don't know much about seal but I can tell you it leaking from more than one gaskets. The reason I wanted to try liqul moly motor oil saver is because I heard a good results about them while I was doing a research on Google and on this site also before I posted my thread. I might fix the gaskets one by one depending on the issues I'm having now. I haven't drove this car for one year so I have to change the oil before I crank it up.
The transmission is on 2nd or 3rd time replaced by the Honda dealership after this it never been replaced.
I'm going to buy Shell Formula oil from Home Depot today if that's the conventional oil. Don't want to used synthetic oil at this mileage.
Most of us are telling you to run Maxlife, an oil with seal conditioners in it. It is not full synthetic, it costs $15 for a 5 quart jug at Walmart. It's an all red bottle. Trust us man, it's the best chance you've got via oil change to stop a tiny drip. You also might want to run around the oil pan and make sure the bolts are not backing out anywhere. Don't tighten them down hard though, either use a torque wrench or a limp wrist.
I had oil pan work done by Goodyear mechanics shop and those technican didn't do good job and I complain about it [censored] work they did. They didn't care about me and took my money for nothing. I be happy if you can give me those torque spec for oil pan bolt. I have torque spec wrench.
9-10 ft lbs. Also, just put a half quart of whatever else you have to fill in the missing oil.