Nulon coolant suitable for Mitsubishi or Ford

[Trex101]

Can anyone advice if this Nulon coolant is suitable for Mitsubishi or Ford vehicle? or tell from the spec sheet if it's good or avg?

Nulon coolant

 

[IPCOlsenVZ]

Mitsubishi - they normally have a sticker in the engine bay somewhere specifying their own stuff however in the genuine service manual it only states it needs to be a glycol mix of between 30-50%.

I use Nulon in a lancer (@40%) and it’s performed well...but I won’t have it in there for 4 years (just for maintenance sake).

I'd use it in a falcon too but I’m not sure about ford’s imported vehicle specs.

 

[Trex101]

Results from the data sheet looks pretty good but I'm no expert so need some advice from more experiences member for spec sheet analysis.

Glassware Corrosion Test (ASTM D 1384)
*AS/NZS
2108.1:2004 *ASTM D 3306 Nulon LL
Copper 10 10 1
Solder 15 30 1
Brass 10 10 0
Steel 10 10 1
Cast iron 10 10 2
Aluminium 15 30 1
* wt. loss mg (max)

Simulated Service Test (ASTM D 2570)
Metal *AS/NZS
2108.1:2004 *ASTM
D 3306 Result for
Nulon LL
Aluminium 1.0 max 1.0 max 0.17
*limit (mg/cm2/week)

 

[vxcalais]

Nulon make good stuff in the sense they cover a wide range of vehicles, i have used green in my car, and red one in a Corolla. If they have your car in the spec list or lube guide then use it.