Kawasaki K-Tech 2 Cycle Oil any good?

[Dave33x1]

Hello,
Wondering if anyone has any exp with this oil or knows anything about it.
I go through about 100 gallons a year of mixed fuel and hond HP2 is getting pricey

I use oil in bigger saws (about 80-110cc) and mix at 40:1

Does anyone know if this oil is pretty good?
Any advice is awesome
Thank you


http://www.kawasakienginesusa.com/engine/accessories/kawasaki-2-cycle-engine-oil

 

[simple_gifts]

It is JASO FD et al certified; That is probably all you need to know;

I'd be surprised if Kawasaki would put out anything other than a top tier product. JMO

 

[FowVay]

I have used cases of the K-tech 2-cycle oil over the years. As mentioned, it is JASO FD and is a very clean burning oil. I think it's made by Citgo. Their 4-cycle k-tech oil is good too if you have a reasonable source for it.

 

[BrocLuno]

ISO EGD and JASO FD is about as good as it gets for air-cooled 2-strokes. I'm sure it is a premium product. I'd have no fear running it in any of my saws, including the hot saws at 14,000 RPM

Depending on fuel used, I might go a bit richer in the high speed motors - say 32:1 ...

Kawasaki and Zenoah supply many 2-stroke motors as OEMs. Their lubes are perfectly fine and may be preferred to refiners more generic products - say Pennzoil.