Y yucca Joined Apr 4, 2012 Messages 514 Location NM Aug 16, 2012 #1 Application is a CAT 950H. Left side HYD, right side ENG. Not much data yet. The oil was factory fill CAT HYD 10wt. Changed at 2k. Current fill is Chevron URSA.
Application is a CAT 950H. Left side HYD, right side ENG. Not much data yet. The oil was factory fill CAT HYD 10wt. Changed at 2k. Current fill is Chevron URSA.
Y yucca Thread starter Joined Apr 4, 2012 Messages 514 Location NM Aug 16, 2012 #2 Here is a little data on the engine. Not much data yet.
M morris Joined Aug 24, 2008 Messages 3,681 Location ks, wichita Sep 1, 2012 #3 many many years ago i built Hydraulic system that had a full flow, full presure. 1.5-3 micron filter. the housing was cast iron. the flow was 30-40 GPM. and it wasnt cheep
many many years ago i built Hydraulic system that had a full flow, full presure. 1.5-3 micron filter. the housing was cast iron. the flow was 30-40 GPM. and it wasnt cheep
R RoadTrain Joined Aug 22, 2005 Messages 17 Location Fort Wayne, IN Apr 25, 2013 #4 Sweet. I have a snow plow you can do next!