Originally Posted By: oilyriser
Read the last sentence. It contains the word "send"
From the Scan Guage manual:
http://www.pureenergysystems.com/store/ScanGauge/SGIIManual.pdf
In this mode sequences can be selected, edited or sent to the vehicle and
responses displayed. This allows special sequences which are unique to
a specific vehicle or rarely used to be sent. Any returned data will be
displayed. Up to 10 sequences can be put into these memory locations
for later recall. They are stored in non-volatile memory and will not be
lost when the unit is disconnected from the vehicle.
The upper right and left buttons cause the memory selection to be
changed. When the desired memory has been chosen, it can be edited or
transmitted to the vehicle.
Pressing HOME will return the display to the home screen. Pressing
EDIT will switch to an entry screen.
¬_ ®
All this means is you can program the scangauge to run a sequence for you saving key strokes. Like a computer macro. It is NOT passing data to the car it is requesting data. Furthermore the sequences are stored on the scangauge not the car.
I'm done. You'll never understand.