But I can not locate it :-( This is HRB215HX model. When I put the lawnmower on its "correct" side and swapped the blades, lots of oil poured out. I could not see any oil pan gasket bolts while the mower was on its side. The bottom of the engine is soaked with the oil. Last oil change, I used synthetic and now the leak has gotten lot worse. I have a suspicion that it is leaking from where the filler tube meets the crank case but unless I take it off, I will not know.
I am not able to figure out what is involved in removing that tube. So far, I have not come across any (free) material on internet which will help me track down this leak.
Honda lanwm owers are popular and many of you might have this or similar model with same type of filler tube. Would somebody be able to walk me through?
Thanks,
- Vikas
I am not able to figure out what is involved in removing that tube. So far, I have not come across any (free) material on internet which will help me track down this leak.
Honda lanwm owers are popular and many of you might have this or similar model with same type of filler tube. Would somebody be able to walk me through?
Thanks,
- Vikas