JHZR2
Staff member
Hello,
I currently have a 19" LCD on my work computer. The computer is a dell laptop on a docking station.
When docked, I get the following information:
Intel(R) Graphics Media Accelerator Driver for Mobile Report
Report Date: 07/09/2009
Report Time[hr:mm:ss]: 08:04:53
Driver Version: 6.14.10.4831
Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 2037 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 384 MB
Graphics Memory in Use: 11 MB
Processor: x86 family 6 Model 15 Stepping 13
Processor Speed: 1995 MHZ
Vendor ID: 8086
Device ID: 2A02
Device Revision: 0C
* Accelerator Information *
Accelerator in Use: Mobile Intel(R) 965 Express Chipset Family
Video BIOS: 1588
Current Graphics Mode: 1280 by 1024 True Color (60 Hz)
* Devices Connected to the Graphics Accelerator *
Active Monitors: 1
* Monitor *
Monitor Name: Plug and Play Monitor
Display Type: Analog
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: 14.0 inches
Vertical: 12.0 inches
Monitor Supported Modes:
640 by 480 (60 Hz)
640 by 480 (75 Hz)
720 by 400 (70 Hz)
800 by 600 (60 Hz)
800 by 600 (75 Hz)
1024 by 768 (60 Hz)
1024 by 768 (75 Hz)
1152 by 864 (75 Hz)
1280 by 1024 (60 Hz)
1280 by 1024 (75 Hz)
Display Power Management Support:
Standby Mode: Supported
Suspend Mode: Supported
Active Off Mode: Supported
So I am viewing at 1280x1024. I would like to go to a 24" LCD monitor, to have more workspace and potentially a bit more size for better ergonomics. The problem is, a 24" monitor would look lousy at 1280x1024, and Im not seeing higher options.
I believe that when I undock, more options are available, but this is of little use/benefit to me. Is there any way that I can ensure that my docked computer would support the resolution of a 24" monitor (or so)?
Thanks!
I currently have a 19" LCD on my work computer. The computer is a dell laptop on a docking station.
When docked, I get the following information:
Intel(R) Graphics Media Accelerator Driver for Mobile Report
Report Date: 07/09/2009
Report Time[hr:mm:ss]: 08:04:53
Driver Version: 6.14.10.4831
Operating System: Windows XP* Professional, Service Pack 2 (5.1.2600)
Default Language: English
DirectX* Version: 9.0
Physical Memory: 2037 MB
Minimum Graphics Memory: 8 MB
Maximum Graphics Memory: 384 MB
Graphics Memory in Use: 11 MB
Processor: x86 family 6 Model 15 Stepping 13
Processor Speed: 1995 MHZ
Vendor ID: 8086
Device ID: 2A02
Device Revision: 0C
* Accelerator Information *
Accelerator in Use: Mobile Intel(R) 965 Express Chipset Family
Video BIOS: 1588
Current Graphics Mode: 1280 by 1024 True Color (60 Hz)
* Devices Connected to the Graphics Accelerator *
Active Monitors: 1
* Monitor *
Monitor Name: Plug and Play Monitor
Display Type: Analog
Gamma Value: 2.20
DDC2 Protocol: Supported
Maximum Image Size: Horizontal: 14.0 inches
Vertical: 12.0 inches
Monitor Supported Modes:
640 by 480 (60 Hz)
640 by 480 (75 Hz)
720 by 400 (70 Hz)
800 by 600 (60 Hz)
800 by 600 (75 Hz)
1024 by 768 (60 Hz)
1024 by 768 (75 Hz)
1152 by 864 (75 Hz)
1280 by 1024 (60 Hz)
1280 by 1024 (75 Hz)
Display Power Management Support:
Standby Mode: Supported
Suspend Mode: Supported
Active Off Mode: Supported
So I am viewing at 1280x1024. I would like to go to a 24" LCD monitor, to have more workspace and potentially a bit more size for better ergonomics. The problem is, a 24" monitor would look lousy at 1280x1024, and Im not seeing higher options.
I believe that when I undock, more options are available, but this is of little use/benefit to me. Is there any way that I can ensure that my docked computer would support the resolution of a 24" monitor (or so)?
Thanks!