I have a 1989 Chevrolet Silverado 1/2 ton 2WD reg.cab. I was trying to get the fill plug out of the differential & found that it is frozen in place. I have tried penetrating oil, heat from a propane torch, heating the plug to where I could drive a torx bit into the hot metal & letting it cool to the torx & even a coal chisel & nothing has worked to even make it turn a slight bit. I have asked a couple of people about an extractor/e-z out set to get the thing out. I really need help especially since I have already drained the oil & replaced the cover gasket with a new one trying to clean up the bell housing where it had leaked before I bought the truck.
Any ideas that will get results fast are greatly appreciated. Thanks
Any ideas that will get results fast are greatly appreciated. Thanks