Estima UOA [image]http://sg.pg.photos.yahoo.com/ph/ianphua/detail?.dir=/12f2scd&.dnm=700fscd.jpg&.src=ph[/image]
Last edited:
Factory, 1,063kms, 1,063kms, 06 Toyota Estima 2.4l
- Thread starter Ian
- Start date
- Messages
- 2,493
- Location
- MSP 'burbs, MN
You should type in your results. Even going directly to the image URL you posted above doesn't work for me.
Here it goes:
2006 Toyota Estima 2.4l (2AZ-FE) CVT
Total Mileage - 1,063kms
Mileage on Oil - 1,063kms
Duration - 14 Aug 2006 - 08 Sep 2006
Iron 7
Copper 46
Tin 14
Lead 2
Chromium 0
Nickel 1
Aluminum 10
Titanium 0
Silver 0
Calcium 1278
Magnesium 16
Zinc 749
Phosphorus 894
Barium 31
Molybdenum 996
Antimony 0
Silicon 256
Sodium 16
Boron 131
Potassium 0
Vanadium 0
Visc 40C/100C 35.2 / 7.5
TAN 0.66
Flashpoint 390
Oxidation 117
Nitration 13
Water (KF - ppm) 253
TBN 5.10
Fuel 228
Soot 0.03
Glycol/Coolant 0.00
Visc Index 190
Sulfate Byproducts 23
Quote:With a 100C vis of 7.5, there is no way this is a 5w30. Toyota is putting 5w20 in most of their engines at the factory now, and it looks like that's what yours got.
Quote:Was given opinion that it could be a 5W30. Wouldnt a 5W20 be too thin for an 'running-in' engine?
Definitely a 5w20. And look at all that moly! Wow!
Quote:Any reason for such a 'thin' oil for run-in period?
Quote:With a 100C vis of 7.5, there is no way this is a 5w30. Toyota is putting 5w20 in most of their engines at the factory now, and it looks like that's what yours got.
Quote:Was given opinion that it could be a 5W30. Wouldnt a 5W20 be too thin for an 'running-in' engine?
Definitely a 5w20. And look at all that moly! Wow!
- Messages
- 2,493
- Location
- MSP 'burbs, MN
AFAIK, no manufacturer specs different weight oils for "running-in" (i.e., "break-in") versus the post running-in period.
- Messages
- 6,424
- Location
- New Braunfels
High Calcium Good Boron and Mega dose of Moly.. VI of 190! I hope they are using this in all new engines!
Similar threads
