Crankshaft pulley for 2013 Ford Edge 3.5L

[Scott S]

I have a 2013 Ford Edge 3.5L
Unfortunately the timing cover is seeping oil, up top. About 2 years ago I had the water pump done, timing chains, etc. I noticed a wobble from the crankshaft, I bought everything new to do the job. Motorcraft Timing chain cover and valve covers, also plenum gaskets, stretch belt I'm going to replace the crankshaft pulley as well, my question is, does that have to be OEM?


Thank you..

 

[parshisa]

based on my experience asking similar question, I think you already know your answer kind Sir

 

[Scott S]

I was hoping that wasn't going to be the answer... LOL

 

[Trav]

my question is, does that have to be OEM?

I would only use OE from a dealer.

 

[Scott S]

Any other brand? They are all on backorder, I have tried several online, local and out of state dealers & wholesaler's.

 

[Urshurak776]

https://www.madmaxfordparts.com/oem...umSgM4sCGR9aXas74T3ZtZKyQ_l_nfZxoCByAQAvD_BwE

Buddy at work orders Ford parts from there quite a bit. MadMax. Just a cool name!

 

[Scott S]

On back order as well, they show as listed, like all the other ones..

 

[Trav]

Tasca Ford claims 3-5 days lead time. It may be worth a call.

https://www.tascaparts.com/oem-parts/ford-pulley-8t4z6312a

 

[Scott S]

You order it, couple days later you receive an email stating it's on backorder...
Is Dorman better Dayco powerbond or ATP?

 

[Trav]

I honestly cannot say if one is any better than the other, with no OE option available it is IMO a coin toss.

 

[Chris142]

ATP has been making transmission parts forever and Dayco belts and hoses. I would trust those. Personally I would go with Dayco.

 

[Scott S]

I honestly cannot say if one is any better than the other, with no OE option available it is IMO a coin toss.

I'm thinking of going with Dorman they carry them at Napa, and I would guess they supply them to a lot of repair shops..

 

[Scott S]

ATP has been making transmission parts forever and Dayco belts and hoses. I would trust those. Personally I would go with Dayco.

Ok Thanks, I just need to find who has it in stock..

 

[D60]

I've run Dorman (and UltraPower which I think is identical) on 2nd Gen Rams which are beaters, but on anything more important I'd avoid Dorman on principle alone.

I too would probably opt for ATP then Dayco in that order -- but I have nothing scientific upon which to base that except for Dorman's continuing commitment to low quality and striving lower all the time....

Someday I'll tell ya how I really feel

 

[Scott S]

I've run Dorman (and UltraPower which I think is identical) on 2nd Gen Rams which are beaters, but on anything more important I'd avoid Dorman on principle alone.

I too would probably opt for ATP then Dayco in that order -- but I have nothing scientific upon which to base that except for Dorman's continuing commitment to low quality and striving lower all the time....

Someday I'll tell ya how I really feel

Thank you I appreciate it.. I know I purchased a ATP/pioneer motor mount, to do this job as well..