Can't get arbor nut off portable table saw

[JLawrence08648]

I have a Skil 10" portable table saw, model 3400.

I can't get the arbor nut off. It turns CC, correct?

I'm using a 24" pipe wrench and still can't budge it.

 

[spasm3]

Go the other way.

 

[Spitty]

Likely it is left hand thread.

 

[JLawrence08648]

I should have posted, I went to the Skil website, the manual says counterclockwise, standing behind the saw I would be pulling towards me. Trying a 36" pipe wrench is not working.

 

[Eddie]

Face the arbor and turn CCW

 

[JLawrence08648]

I did. I faced the arbor and turned to the left. I thinking of drilling a round hole in the side and use my impact gun.

 

[Warstud]

How to remove blade >>>>>

 

[FT92]

every table saw i ever used had left hand threads

 

[spasm3]

Can you see then end of the bolt threads at all? If so you should be able to see which way the threads run.