Axle Swap

Status
Not open for further replies.
Joined
Aug 13, 2015
Messages
436
Location
Caribbean
Good day,
The axles in my car are to be changed.

The replacement i got were axles without the abs ring( the ring with all the teeth etc.)
My mechanic said it can work, all that is needed that he swap out the abs ring from the old axle onto the new one no problem.

What you all think? would that work?

Nissan n16 almera
 
Tricky.The rings may crack going on or off,and if they nick some of the teeth....not good.
 
Actually, the rings went on fine and perfect.
We did it, i would appreciate anyone reviews and opinions on going this route.
 
It wasn't on before you started, though?

Check if the sensor wires are damaged or unplugged.
 
I'm not so sure on having to get the code cleared. the mechanic could not do that? generally it can be cleared by disconnecting the battery. I would also think that if the ABS system was sensing the tone ring, the light would go off.
 
yes the light was on before
frown.gif

i literally fed up of this abs system giving problems.
This is literally the 3 or 4th time im going back to fix abs problems
 
If the light was on before, there is a problem other than the ring transfer.
 
Status
Not open for further replies.
Back
Top