Auto-rx in a John Deere Tractor

Status
Not open for further replies.
Joined
Aug 6, 2004
Messages
2,634
Location
Chicago
I want to Auto-rx four John Deere tractors. They each hold 5 gallons of oil. My questions are:

1) How much Auto-rx should I use?

2) How many hours should I run the clean phase?

3) How many hours for the rinse phase?

I would have guessed 50 hours each but it would be just a wild guess.
 
1. The recommended dosage is 2 ounces per quart. Since each tractor holds 5 gallons, which makes 20 gallons total for all 4 tractors. That's 80 quarts total, and you'll need 160 ounces (40 ounces per tractor) of Auto-RX. It comes in 12 ounce bottles, so you'll need 14 bottles, which will give you 168 ounces.

2 & 3. What is the normal drain interval? 50 hours is not a bad guess, I would say up to 75 hours, but only if 75 is not more than the recommended drain interval.
 
Read post on case price for bitog members (24 bottles) than e-mail me. I would like to have you document this application
for posting. photos before & after and your comments. Perhaps Auto-Rx willl pay for oil analysis on oldest tractor or one with most hours.
Frank
 
Quote:


Read post on case price for bitog members (24 bottles) than e-mail me. -SNIP-
Frank




This has my curiosity piqued- where is this post found? I like to purchase stuff in case quantities (probably like it too much!!!). Thanks.
 
Status
Not open for further replies.
Back
Top