You will not find automotive applications with the SYNTEQ media. The HD Ford V8 filter is used world wide.
Donaldson does make automotive filters ..absolutely.
Again, when is the last time you saw one on a shelf?? They're in the same class as Baldwin or Hastings. They may be available at an independent service center or independent auto parts store ..but no PB ..no AZ ...no AA ...or 99% of any other "chain" that you can think of.
..and when is the last time you bought from a truly "independent" parts house outside of being in BFE??
Go to the Donaldson site and punch in any automotive filter you please. Tell me when you see one that says "SYNTEQ" media as a secondary or alternative application.
All of these are Donaldson xref's of Ford filters
A - OD (Inches): 3.66
B - Thread Size (Inches): 3/4-16
C - Length (Inches): 5.35
D - Gasket OD (Inches): 2.81
E - Gasket ID (Inches): 2.42
Relief Valve Setting (PSI): 7-10
Anti Drain Valve (Y/N): Yes
Product Type Description: LUBE SPIN-ON FULL FLOW
Primary Application: FORD, MOTORCRAFT FL1A
Substitution: P169071=Synthetic Media
PH3614
A - OD (Inches): 3
B - Thread Size (Inches): 3/4-16
C - Length (Inches): 3.4
D - Gasket OD (Inches): 2.75
E - Gasket ID (Inches): 2.37
Relief Valve Setting (PSI): 7-10
Anti Drain Valve (Y/N): Yes
Product Type Description: LUBE SPIN-ON FULL FLOW
Primary Application: MOPAR L335, CHYRSLER, CLARK,
Primary Application 2: INTERCEPTOR MARINE
FL400S
A - OD (Inches): 3
B - Thread Size (Inches): 3/4 - 16
C - Length (Inches): 4.74
D - Gasket OD (Inches): 2.75
E - Gasket ID (Inches): 2.37
Relief Valve Setting (PSI): 7 - 10
Anti Drain Valve (Y/N): Yes
Product Type Description: LUBE SPIN-ON FULL FLOW
Primary Application: FORD E1FZ6731A, MOTORCRAFT
Primary Application 2: FL400
FL820S
A - OD (Inches): 3.67
B - Thread Size (Inches): M22 X 1.5
C - Length (Inches): 3.58
D - Gasket OD (Inches): 2.81
E - Gasket ID (Inches): 2.42
Relief Valve Setting (PSI): 15
Anti Drain Valve (Y/N): Yes
Product Type Description: LUBE SPIN-ON FULL FLOW
Primary Application: FORD LIGHT TRUCK
PH16
A - OD (Inches): 3.72
B - Thread Size (Inches): 3/4-16
C - Length (Inches): 3.95
D - Gasket OD (Inches): 2.84
E - Gasket ID (Inches): 2.48
Relief Valve Setting (PSI): 8-16
Anti Drain Valve (Y/N): Yes
Product Type Description: LUBE SPIN-ON FULL FLOW
Primary Application: DODGE LIGHT TRUCK
I'm not sure ..but this isn't Ford
A - OD (Inches): 3.31
B - Thread Size (Inches): 3/4-16
C - Length (Inches): 3.93
D - Gasket OD (Inches): 2.47
E - Gasket ID (Inches): 2.25
Anti Drain Valve (Y/N): Yes
Product Type Description: LUBE SPIN-ON FULL FLOW
Primary Application: SUBARU, PINTO, DATSUN
This should be for a Honda
A - OD (Inches): 2.68
B - Thread Size (Inches): M20 X 1.5
C - Length (Inches): 2.56
D - Gasket OD (Inches): 2.56
E - Gasket ID (Inches): 2.19
Relief Valve Setting (PSI): 11-17
Product Type Description: LUBE SPIN-ON FULL FLOW
Primary Application: NISSAN, MAZDA, MITSUBISHI
So ...there you have it. Find the synthetic media