allison report

Status
Not open for further replies.
Looks like it worked. I did an oil analysis on three allison tranmissions we run and they all came back nearly the same. The only difference was this one was run 800 hours and the others were 300. I did not change the oil in them but replaced the filter and installed a better filter/header combo. I basically installed what the allison part breakdown called for. If the oil is fine otherwise, why replace the oil if I can just filter it better?
 
i tried to look again and found it's not working so well. how do you get a report up on there?
 
All right, I'll do it this way. This is in an MT653 Allison with 890 hours on the oil. We're using Texaco Heavy Duty Synthetic ATF.

Al 8
Chromium 0
Iron 112
Cu 16
Tin 4
Moly 0
Nickel 0
Mag 0
Silver 0
Titanium 0
Potassium 0
Boron 49
Silicon 5
Sodium 8
Calcium 278
Mag 4
Phos 467
Zinc 29
Barium 0

Insolubles % .1
 
Last edited:
Status
Not open for further replies.
Back
Top