2021 Sentra rear banjo bolt torque spec

[i6pwr]

Does anyone know the tightening torque for the rear brake hose banjo bolt to caliper? I don't want to snap this bolt on an almost unobtanium caliper...lol. I trust I can get it close enough, but these are big $$ right now.

 

[RooflessVW]

O-rings or crush washers?

 

[i6pwr]

Crush

 

[RooflessVW]

Crush

New crush washers.

90° past the sharp rise in torque.

 

[FowVay]

Service manual says 13 ft. lbs with new crush washers.

 

[i6pwr]

New crush washers.

90° past the sharp rise in torque.

I'm not saying that's wrong, but I don't think it has that much give. I thought it was around 12 ft lbs.

 

[i6pwr]

Service manual says 13 ft. lbs with new crush washers.

We replied at same time.

Ok, sounds good, thanks.

 

[RooflessVW]

I'm not saying that's wrong, but I don't think it has that much give. I thought it was around 12 ft lbs.

Mark it and let me know

 

[i6pwr]

Mark it and let me know

Will do, I'm curious as well.

 

[GSCJR]

@i6pwr 17 ft-lb with new crush washers; from the FSM.

 

[paulo57509]

When I can't find specifics, I use this as a rule-of-thumb reference.