f355spider
$50 Site Donor 2025
Here you go, from YouTube:
https://www.youtube.com/results?search_query=f10+headlight+condensation
https://www.youtube.com/results?search_query=f10+headlight+condensation
ISTA-P works ok, on BMW and MB you really need a 100A power supply. You can make one easy enough from an old HP server power supply for less than $50.Offline coding and online coding are two different things.
I'll be thinking on this for a few months, then make a final decision. Truth be told, there are several things about the 535d that scare the crap out of me and always will. If the DEF system or the HPFP took a dump, cost to repair could be greater than what the car is worth. Then if I decide to sell it and buy my old Subaru back from my in laws, it comes with it's own potential ticking time bombs (CVT, has a parasitic battery drain at present...). First world problems, all.
For headlights though? Mid 4 figures is a low mile used transmission installed, on lots of cars...You should reconsider. A mid 4 figure repair can happen on any modern vehicle, regardless of brand.
On the other hand, a 5 figure repair is certainly a valid reason to give someone pause.
True but this is an idiotic headlight… that much money for a headlight is absurd.You should reconsider. A mid 4 figure repair can happen on any modern vehicle, regardless of brand.
On the other hand, a 5 figure repair is certainly a valid reason to give someone pause.
I’m curious why you couldn’t put a bit of sweat equity into it and find the leak. There are only so many locations it can happen at.If left this way, the moisture will eventually ruin the electronics modules that control the adaptive headlights. This is going to be a very expensive fix, no way around it. The parts alone can be several thousand dollars. I knew before buying this car that owning an out of warranty BMW can be very expensive, and I can afford it, but a multi-thousand dollar bill for a headlight repair wasn't on my bingo card. C'est la vie.
Headlights are getting really expensive. My Sequoia has sealed headlights and fog lights, and they're running $900-1100 a piece, and they are just a bit stronger than lighting two candles on my hood.Hmmm, I guess its a sign to bail out?
For headlights though? Mid 4 figures is a low mile used transmission installed, on lots of cars...
Yikes! So far I just get ones from the local wrecker for dozens of dollars if needed, or do some wet sanding on the existing ones, and carry on, but maybe the Outback ones might not as easy to find.Headlights are getting really expensive. My Sequoia has sealed headlights and fog lights, and they're running $900-1100 a piece, and they are just a bit stronger than lighting two candles on my hood.
Hella is running around $500 cheaper for F10, around $1,200-1,300. Interestingly, regular assembly is $20 cheaper than adaptive one.True but this is an idiotic headlight… that much money for a headlight is absurd.
I’m curious why you couldn’t put a bit of sweat equity into it and find the leak. There are only so many locations it can happen at.
And while I don’t want to come across like a hack, or ruin the required parts, I’d say that I can count on one hand how many times I’ve used the adaptive function on my 135i. If it didn’t work, would it matter for the core functionality of the headlight? I think the projector in my 135i moves for high/low beam, so the answer may be maybe… I’d look into it. If you can get high/low beams successfully, I may be less inclined to deal with adaptive headlights…
Of course you need to stop the water entry regardless. Can only be but a few locations.
Yep, used ones are way to go.Yikes! So far I just get ones from the local wrecker for dozens of dollars if needed, or do some wet sanding on the existing ones, and carry on, but maybe the Outback ones might not as easy to find.
Thanks for posting. I've been down that rabbit hole deep before I started this thread. After watching several "fix" videos, I've decided not to try it myself. Success rate would depend heavily on my patience and ability, neither of which I have much confidence in when it comes to this particular issue. I'm going to eat the cost of repair this time, and decide after a little while if I want to keep the car much longer.Here you go, from YouTube:
https://www.youtube.com/results?search_query=f10+headlight+condensation
I told my shop that ECStuning has the Hella headlight assembly for $1000, and they said they would look into it. They normally get all their parts from the BMW dealer in town, so in reality the only $$$ you save by using the indy is on labor. But something is better than nothing I suppose.Hella is running around $500 cheaper for F10, around $1,200-1,300. Interestingly, regular assembly is $20 cheaper than adaptive one.
For that lighting, considering how much assembly costs for absolutely crappy headlights, it is about the right price.
Not that OP should just go and buy new ones.
Headlight replacement is no big deal. If shop did not know about that before, I would question their expertise on BMW's.I told my shop that ECStuning has the Hella headlight assembly for $1000, and they said they would look into it. They normally get all their parts from the BMW dealer in town, so in reality the only $$$ you save by using the indy is on labor. But something is better than nothing I suppose.
My indy has been wrenching on BMWs for decades, and has run his own shop since 2017. His shop has a good reputation in town. I'm confident he's aware of all the different places he could source parts if he needed to. Regarding fixing it myself, I can appreciate the DIY enthusiast spirit behind what you're saying, but it's not something I think I could fix to my own satisfaction. A lot of jobs I'm willing to take on but just not this one.Headlight replacement is no big deal. If shop did not know about that before, I would question their expertise on BMW's.
They should check price at Worldpac. Sometimes they as a shop can save there 15%. So if Worldpac carries Hella or ZKW (OEM on many BMW's) it might go below $1000.
I would still try to fix it, if not, get used one from dry states like AZ, CA, CO.
If the same failure happens to the passenger side headlight and I still own the car, I will give serious consideration to this method.Honestly this is an pretty easy fix, remove the light housing, get it in the house and let it dry out then do the flowable silicone routine, just a thin bead (don't get it all over the place) all around the mating line, it will find the leak and flow into it sealing it for good. Don't mess around trying to separate the lens from the housing, you will have to reseal the whole housing. If the light is working okay fix it for under $10. I have sealed many lights and old MB 123 windshields under the rubber with this.