2013 Honda Odyssey Power Sliding Door reset

Status
Not open for further replies.
Joined
Nov 3, 2018
Messages
1,428
Location
CA
Does anyone knows the sliding door reset procedure?
After replacing the passenger side sliding door motor, the switch does not work anymore. Even with the old motor the switch does not work either now. Fuses are all ok. Only thing left is to reset it.
 
I surely don't know, but since Google is your friend....

Type:
odyssey power sliding door reset

On the Google page. LOTS of responses.

(Your owner's manual likely has it, also)
 
Originally Posted by JLTD
I surely don't know, but since Google is your friend....

Type:
odyssey power sliding door reset

On the Google page. LOTS of responses.

(Your owner's manual likely has it, also)


Have tried but they are for 2010 and below. Mines a 2013.
 
Hmm sorry missed your year. Might try they could be the same. Anything in the O M?

Tried to look at owners manual online but I'm on my phone… Not allowed.

Numerous YouTube videos...many without years, one may have your answer.
 
Try this:

Switch the sliding doors to off.
Manually open and close both sliding doors.
Switch them back on.

That worked for me when I replaced the battery on my van and they stopped working. If the vsa light is on there is another procedure where you have to jump 2 pins on the obd port. I also have a 2013 oddy.
 
Last edited:
Originally Posted by GREENDESTINY
Try this:

Switch the sliding doors to off.
Manually open and close both sliding doors.
Switch them back on.

That worked for me when I replaced the battery on my van and they stopped working. If the vsa light is on there is another procedure where you have to jump 2 pins on the obd port. I also have a 2013 oddy.


That is what I did a few moments ago and it worked. Turned off switch, turn back on. Manually open and close both side and walla. Thanks guys!
 
Status
Not open for further replies.
Back
Top