2010 Camry 2.5, AMSOIL OE 0w-20, 8,611 miles

Status
Not open for further replies.
Joined
Dec 13, 2002
Messages
2,528
Location
North Carolina
Air filter was changed last oil change and oil filter is the cartridge Wix filter. It looked good. I wish all the vehicles would go to a cartridge style setup. Friends car that transports her grandkids all over the county to various functions and events when not in school.

Code:
We have a general checklist we like to see an oil report hit when we're going to recommend a longer oil run.

First, metals should be fine. Iron can be a bit higher than average on a longer oil run, but all other metals should be low

and steady. Check! The viscosity shouldn't be too far off. Check. No fuel, water, coolant, or excessive silicon should be

present. Check! Insolubles should be within limits (ideally a bit lower than the limit). Check! And the TBN should be

above 1.0. Check again! This engine hits all the required marks -- nice report! Try 10,000 miles.





OIL AMSOIL OE 0w-20 OE 0w-20

MILES IN USE 8,611 5,242

MILES 87,478 78,867

SAMPLE TAKEN 04/16/14 12/17/13



ALUMINUM 2 2

CHROMIUM 0 0

IRON 4 2

COPPER 1 1

LEAD 0 0

TIN 2 0

MOLYBDENUM 69 69

NICKEL 0 0

MANGANESE 0 0

SILVER 0 0

TITANIUM 0 0

POTASSIUM 0 1

BORON 59 79

SILICON 16 11

SODIUM 5 3

CALCIUM 2066 2024

MAGNESIUM 23 48

PHOSPHORUS 572 680

ZINC 681 752

BARIUM 0 0



SUS Visc @210° 50.5 50.0

cSt Visc @100°c 7.43 7.26

Flashpoint In °F 425 415

Fuel %
Anitfreeze % 0.0 0.0

Water % 0.0 0.0

INSOLUBLES 0.2 0.1

TBN 2.2 2.5

TAN
 
Cool. I use the signature series in about 10 months service. Mine is more back road driving and I may get 12k out of mine. That's a great report.
 
Another good showing for Amsoil's Grp III API certified oils. Really low wear metals, still a high flash point.

Amsoil XL will be my next fill.
 
Last edited:
Status
Not open for further replies.
Back
Top