My concern is 3.4252-3.4256 is the new spec, service limit 3.4279 for cyl bore size. How well would a .0005" graduated bore gauge work?
Could I zero the gage (using the mic) at the spec, and after getting the initial reading, zero the gauge -.0005 away from that reading and work my up to the reading by zeroing the gauge .0001 up each time?
Could I zero the gage (using the mic) at the spec, and after getting the initial reading, zero the gauge -.0005 away from that reading and work my up to the reading by zeroing the gauge .0001 up each time?