Search results

I have been searching on the forums here and not found this specific topic discussed. I would like to do an Auto RX regimen on my 2007 335i with 23,000 miles. I have successfully done this regimen on my old 330CiC with Castrol GTX 10W-40 which is very close in hot viscosity to Mobil 1 0W-40...

I've tried the search function on the UOA forum but I have a suspicion the search function on this board is carp since I never come up with any results. I am looking for a VOA/UOA for OEM BMW 5W-30 synthetic motor oil. Anyone can point me in the right direction? Thank you!!

I want to put my 2001 BMW 330 CiC through an Auto RX regimen and for that need to switch to a good dino oil. BMW requires BMW 5W-30 or Mobil 1 0W-40 as the only oils that meet BMW LL specs in the US. Since I cannot use the synthetic with Auto RX I need a recomemndation what brand and type of oil...

Do any forum members ahve experience with this systems and what are your thoughts?? http://www.oilmate.com/

Molakule, do you still sell oil additives? I remember you started a couple of years ago to sell ZDDP and other pre mixes. Do you ahve a link to your web site? Thanks!!

Can someone please summarize for me what the main differences between regular and high mileage oil are? I need to decide if I want to run regular castrol GTX or GTX High Mileage in my marine application. Thanks !!

Looking through all the posts about polyetheramine there are quite a few people looking for the highest PEA concentrated additive. It is so far CRC Marine Fule Treatment & Stabilizer Check label and MSDS out here: http://www.crcindustries.com/marine/content/prod_detail.aspx?PN=06151&S=N...

There are two mainstream fule addititves/cleaners out there. One is solvent naphtha, aslo called stoddard solvent, that is used in most carb/injector and combustion chamber cleaners such as Seafoam, MMO, Gumout, STP, etc. Seemingly the more active or effective solvent is polyether amine in...

I need some opinions on the best dino 20W-50 out there that is also readily availble over the counter. I am especially looking for the strongest additive package since it will be used in a marine engine. I have not spent much time researching 20W-50 so any help would be appreciated !!!

I have so far been using Mercs 25W-40 in my twin 8.1S inboard engines (same as 496MAG). I would like to avoid the high cost f the Merc oil, but need something in the 20W-50 viscosity. I tried 15W-40, but it's too thin and oil pressure is only at 20-30 PSI. With the 25W-40 il pressure is 40-50...

I would like a recommendation for a good / the best 15W-40 HDEO available over the counter. What I mostly see here in the stores is Delvac 1300, Pennzoil LL, Delo 400, Shell Rotella. Thanks for your help !!!

... except the viscosity??

WOndered if the color and scent changes from the M04 to the M05 batches shown here on the board were substantiated in the VOA Is it true now that GC going forward is no longer green and seems to be thinner.

Please advise where I can mail order Schaeffer's products now. THX!

FYI ... four bottles ... shrunk wrapped ... $9.95 for all four ... for those with a COSTCO in town ... and a membership of course ...

What's currently the consensus here on the forum for the best dino oil? used to be Chevron Supreme and Havoline. Still that way?? BTW, COSTCO has Chevron SUpreme in many viscosities and they also sell shrink wrapped 4-bottle packs of Techron for $9.95 !!

Here are the last three UOAs on this motor Oils left ot right were: GC - Syntec 0W30 US made - Redline 5W-30 The GC had about 1300 miles of heavy use pulling a 3500 lbs. trailer from Iowa to North Carolina on the interstate in 90F weather during two days in June. Total miles on the Burb are...

Autozone now runs a special on all castrol oils incl. Syntec basically if you buy five quarts, you get a free Bosch Premium oil filter. Just got more GC and a free Bosch oil filter for my Burb

I just bought another batch of Castrol Syntec 0W-30 a.k.a. "GC" yesterday and noticed that Castrol again has changed the bottle design. From Left to right: NON-GC Castrol 0W-30 in the last design form before going to GC (notice the API starburst on all non-GC stuff!!), next is the Castrol...

Can somepne explain to me how to post PDF files in postings here on the board? I have three UOAs and would rather post the Blackstone PDF than retyping all that info. Thanks!!