Search results

I installed this filter we got from Rockauto on my neighbors 2013 Ford flex with the 3.5 Ecoboost. Ever since installing (1200 ish miles) the car has been setting a low oil pressure light at idle but very intermittently for no rhime or reason and we even replaced the oil pressure switch, it...

Starting to become on the lookout for a new set of shoes for the ol' medicare sled. I put a new set of Arizonian silver edition III 225 60 16 tires on in 2019 when I bought the car. Overall, those have been great tires, they're 5 years old with 16K miles now and while the tread is still...

Came of coworkers 2010 Chrysler T&C 3.3 V6 with 157000 miles it was in use for 2 months. Rotella T4 15W40 was used. Replaced with same oil and filter. This engine appears to be cleaning out pretty well and going to do oil pan gasket during next oil change. The filter was cut open and left to...

Protec WIX PXL57502 cut open only 1100 miles of use but 6 months of short trips. Engine had STP high mileage 5W20 with a generous amount of MMO in it that I wanted to get out. The engine oil was really dirty compared to usual and I also ran a bottle of Redline SL1 in the fuel back in July and...

Came off my coworkers 2010 Chrysler T&C 3.3 V6. 4 months and 2900 miles. This is that nasty engine I posted about a couple of times but it's cleaning up. Shell rotella T4 15W40 was used. Replaced with same oil and filter.

Came off my coworkers 2018 Dodge Charger Daytona 5.7 hemi, filter was installed September 30,2022 and has 9,000 miles of use on it. The anti drain back valve is a bit stiff but it looks like it held up well. Replaced with Fram Ultra XG10060 and Supertech 0W20 full syn.

Helping my nephew out with his 99 Dodge Dakota 5.2 V8 5 speed NV3500. Planning on changing the transmission fluid one of these days. What do these transmissions use and does anyone have any recommendations on a good oil they've had experience using with one of these transmissions? I am very...

Napa pro select 21085 in use 3.5 years and unknown exact miles 2000-3000 miles. Came off 1999 Dodge Dakota sport 5.2 5 speed 4x4. It sat around a lot looks like it held up well.

This was on my coworkers 2010 Chrysler T&C 3.3 V6 for 2000 miles and 2 months use. This is the engine I pulled that 16,000 mile abuse jobber filter of and posted about 2 months back. The oil came out looking way better than I thought it would considering how it looked last time. Shell Rotella T4...

Microgard 51069 off a 1990 Corvette with a 350 V8 it was in use for 2 years and 4 months and 3000 miles with O'Reilly high mileage 10w40. It was a pretty straight filter my rough handling caused some of the waviness in areas. Replaced with a Denso filter and Shell rotella T4 15W40

I changed the CVT oil in my brothers Scion Iq today with him, the first CVT I've serviced. He brought me Castrol Transmax ATF/CVT universal fluid. On the back of the jugs, I noticed all of the specs it covers including being compatible for use where Dex VI, Dex III, Mercon SP, LV V and Mercon...

Came off a coworkers 2010 Chrysler T&C 3.3 V6. It'd been 3 years and 16,000 miles since it had an oil change. It did have a lot of topoff oil added to it since it's an oil stove. The dipstick broke off in the tube and the quick lube places wouldn't change the oil because of it and he lives in an...

Looking to buy some 75w90 for a Ford 8.8 with a clutch style limited slip. In the years past I've used all kinds of cheap stuff, supertech, stp, valvoline white bottle, valvoline synpower (I don't consider that one cheap quality but the price sure went up the past few years) etc. I noticed the...

Microgard MGL51356 cut open off my parents 1997 Mazda 626 2.0 I4. Filter has been on there about 3.5 years and 1000 or so miles. Lots of short trips and very infrequently driven the past couple of years. Changed oil after putting new radiator,hoses,thermostat and temperature sensors in getting...

9 months 900 miles of use, lots of idle time and short trips. I'm very surprised to see how straight the pleats are after seeing 90 psi oil pressure with Rotella 15w40 oil every time it starts cold. I bought another case of these recently and the labeling on the filter is different but says made...

Wix 51394 I installed in 2015 on a John deere LX279 with liquid cooled V twin 17HP Kawasaki engine. I remember using Mobil super 5000 10w30. No hour meter but the owner has a LARGE lawn and I'm sure there's at least 200 hours on the oil and filter. If I remember right, he said it takes 2 hours...

I've been searching the web for a tube of distributor cam grease and found very little about it. Either a few old threads that weren't helpful or the products I have found are discontinued. I used to have a tube of Echlin moly distributor cam grease and it has taken a scenic vacation to an...

Neighbor asked me to change oil on their 2015 Ford Taurus with the 3.5L V6. Oil change was 5K miles past the service due date which I'm pretty sure was a 5K interval. It drained all 6 quarts and the oil didn't look or smell bad and this filter is extremely surprising. Replaced with a Fram Ultra...

I installed an external spin on trans filter in the cooler line circuit on my F-250 back in 2018 and this filter has been on ever since. It definitely caught some clutch material and other nonferrous wear metals as the oil that came out of the filter was pretty glittery. The C6 transmission only...

A relative of mine bought a 2012 GMC terrain with a 2.4 liter ecotec last year, put 6500 miles on it and I did an oil change and some other service work. The dealer it was purchased from said they changed the oil and its had 6500 miles put on it since purchase but I dont think they actually...