Search results

  1. W

    Kayak trolley hub lube.

    The 8" fiberglass infused plastic wheels with 20.21mm ID hubs, reside on 19.98mm stainless steel hubs. Very slightly magnetic stainless, some 400 series i imagine. No worries if a human is pulling it walking speed But this particular human is pulling it at 12 to 14mph, on an electric...
  2. W

    Electric motor bushing bridge

    I have a 2.5 gallon shopvac. Loved its performance compared to a buckethead vaccuum of similar size. Investigating bearing type noise, I found one end of the bracket holding the felt surrounded brass bushing, broken. JB Weld to the rescue. I scuffed all Mterial for maximum mechanical tooth...
  3. W

    8 foot tall leaning fence.

    Fence was built after Hurricane Irma knocked down the old one. So about 5.8 years old. 4x4 treated posts are hopefully set 4 feet deep. In sand. Think loose beach sand, easy to dig ankle deep with half an ankle twist/shuffle. 4x4 treated posts, 6 feet apart, mostly. Fence is leaning into...
  4. W

    Alcoholic Dementia

    Anybody have their mom or Dad diagnosed with alcoholic dementia? My mom is in bad shape, plenty of tests the last 8 months show nothing. Neurologist says mri scan is perfectly normal for someone her age(80). Blood tests and 3 ER visits for mass confusion episodes, show that apparently she is...
  5. W

    Accessing the fuel in modern vehicle gas tank, to run generator

    Every suggestion I made pre storm to my 85 year old former engineer father was rebuffed. especially the 'get more gasoline containers' one. Luckily he was outside the eyewall. regardless, he has no power, He does have a Generator, but no more fuel for it. Has a 2022 cadilliac with a full tank...
  6. W

    Dot 1717 Cooper AT3

    4 : 30 x 9.5 x 15 About 25k miles, run 41 to 50 psi 90% highway Rotated every 5k or less. One tire is dot 0517 Plenty of tread left, but loud. All 4 tires show exact same issue on whitewall lettering, on the 3. White mounted Facing in One tire has a small crack through 'cooper' whitewall...
  7. W

    Cracked samsung a11 screen.

    Dropped from 3 feet or so onto cork flooring Landed nearly flat on face in protective cover. Shattered half of screen. Still works fine, but can feel sharp edges. Watched 2 different repair videos. Not sure I could do it... Devote the time, and try to develop the new skills. The heating of...
  8. W

    Elderly driving, taking away their keys.

    It has become exceedingly obvious that my mother should not pilot a vehicle anymore. She's always been a car person. Wants to go out 3 or more times a day, even when there is no reason to go out, just to get out of the house. I told her she could no longer drive, and she ignored me. Angered...
  9. W

    2005 CR-V pad slap

    I've been tasked for giving my sisters 2005 honda CR-V a 'once over' whatever that means, to her. 200k miles. I did 2 drain and fills with Honda DW-1 two Xmas's ago on it, and an oil change with a Fram ultra and Pennzoil platinum 5w-20. She had bought new Centric brake pads for it without...
  10. W

    Dual V belt pulley machining, matched belt desires.

    Last December, I replaced an inoperable A/C compressor, with a second alternator, on my LA-318. In the process of aligning the alternator's pulleys, I noticed that the newly mounted second alternator ( a Nippondenso) has 2mm more space between the V Belt grooves. I was not intending to...
  11. W

    Smoked a 120VAC electric leaf blower motor. Wanna retrofit 12 or 24vdc motor

    First off, this was an old Toro leaf blower, not mine, and I am replacing it with new for the owner. It still works, but today slowed down, and when I turned it off and gave it sniff test, knew something was not right. I opened it up. At least 50$ of brush life left. Commutator had two...
  12. W

    Thread forming tap vs thread cutting tap

    I'm Looking to make 3/8-16 threads in a 3/8" thick chunk of copper , for some brass bolts to make my own upgrade proof busbar. I've drilled and tapped copper before without a drill press, for 6mm metric thread ( nippondenso alternator + output stud), but was less than impressed with the...
  13. W

    Smartphone Fingerprint scanner

    My old Samsung S4 mini is soon to no longer be supported by my carrier, Ting. I had some other Samsung phones from my dad that I used as mp3 players, or accellerometer or Lux or Db apps, which technically are supported, when I plugged in the IMEI number, and having ordered a new Sim card. But...
  14. W

    Dad's Chimney is leaking

    This Home is in SW Florida. The fireplace below never burns wood anymore, not for 20+ years, only propane, and it rarely gets used. I've no experience with roofing, or chimneys. A damp spot further developed on the interior ceiling after a tropical storm this year, just downhill from the...
  15. W

    What's involved in replacing the O-ring on a transmission Fill tube? Chrysler A-500 / 42rh

    Is a pan drop necessary? How about a temporary solution. A good cleaning and RTV perhaps?
  16. W

    Read my Spark Plug

    NGK GR4GP ~25K miles Rebuilt Mopar LA-318 / 5.2 liter V8 w?~ 60k miles on rebuild Plugs removed after completing 2500 mile journey in 4 days. Some Gumout regane still in tank at beginning of journey https://www.ngk.com/ngk-2763-gr4gp-g-power-platinum-spark-plug
  17. W

    Air Cleaner Temp Sensor

    LA-318 TBI This sensor is inside the air cleaner housing, in board of the round air filter. It has two vaccuum lines attached to it, one vacuum source from the throttle body, one to a vaccuum modulator, which lifts a door inside the snout leading to the aircleaner. This blend door diverts air...
  18. W

    a-500 chrysler TX, no reverse

    An Online acquaintance of mine has a 30 year Old Dodge based Roadtrek class B Rv with this A-500 overdrive transmission in it. She is Elderly, in western Texas, travelling solo, and is stressing, as it will suddenly not go into reverse, and while it does go into first it is apparently...
  19. W

    Saginaw PS pump vacuum bleeding

    Late 80's mopar. I replaced my crappy super loose reman'd Steering gear with a Redhead Steering Gear, eating the core charge. $$$! Lucas PS stop leak had been inside my otherwise problem free quiet PS pump, for years. Very effective, for years, no leaks, and I'd even forgotten the pump once...
  20. W

    Bolt(s) holding timing chain cover & Water pump and accessory brackets, weeping coolant, again

    Mopar LA-318 5.2 liter v8 in a B van Aircraft permatex worked for 3 years on the main culprit, a 6 inch long bolt holding on the steering pump spacer and air pump brackets to water pump and timing chain cover. I've got a new 7 inch grade 5 3/8-16 bolt ordered, the ancient original 6 inch grade...
Back
Top