Search results

I've run Mobil 1 in my 2001 Sequoia since 12,000 miles. I now have over 100,000 miles and there are NO leaks whatsoever. I also have Mobil 1 ATF and Mobil 1 gear oil in the rear end. All have no leaks.

While I've never owned a Lexus, any name brand 5w-30 oil should work great. Sorry I can't help you with specifics on how to change the oil in that particular vehicle but it should be about like any other vehicle. You might look at the Lexus Owner's Club. Here is the DIY oil change...

Here we go again!

Titan, Well said. We need more people with an attitude and ethics like yours.

martyi, I'm glad to see that you care about your vehicle beyond the time that you intend to keep it. The Honda is a fine machine indeed. Your original plan is a great idea and will go a long ways in helping your Honda last for hundreds of thousands of miles. Thank-you for caring about the next...

It is TRULY sad when a product of equal quality loses its appeal simply because it's made in the USA.

Pitbull, Keep doing what you're doing and the engine will last longer than you wish to keep it. Stick to your plan.

My unprofessional opinion is that it's low on refrigerant.

I have 90,000 miles on my 2001 Sequoia with the 4.7 engine. I have only used regular unleaded fuel since new. Absolutely no problems. I didn't check the owner's manual but as I recall, regular unleaded is specified. If you need me to check, let me know and I'll be glad to look it up for you. Stan

chinee, What kind of oil filter are you using? I remember reading a previous post of yours and it seems as if you were using a Purolator Pure One. Are you still using it? I am changing the oil on my Sequoia with M1 at 5K intervals. Obviously, this is overkill. I will stretch that to 7500 miles...

Looks like a typical Toyota UOA - nearly no wear. By the way, while I could certainly be wrong, it is my understanding that the sludge issue was resolved in the middle of the '01 model year. I have no documentation of this but that's what I understand.

I own a 2000 Honda Accord V6. There is no transmission pan which can be dropped. On the V6 model, you add ATF through a fill hole after you remove a threaded bolt in the top of the transmission. On the 4 cylinder model, you add fluid through the dipstick hole. I hope this helps. By the way, I...

I would recommend new rotors as having them turned is too unpredictable. The machinist at our local NAPA store tells me he quit machining brake rotors for this reason. While it is certainly possible to machine a rotor and get more life out of it, it is my belief that most rotors and drums are...

I too would get the OEM filter unless a name brand aftermarket were significantly less expensive.

Many people, including myself, repack their front wheel bearings when a front brake job is done. I have waited until the second time I've replaced the front brake pads to do it and I've never had a problem. It is not a difficult job but it is very messy. I'm sure there are illustrated...

Hunter GSP9700 is the BEST wheel balancer. I only use shops that have this balancer and have a tech who knows how to use it. Alignment machines I'm not familiar with but I understand Hunter makes some darn good ones. Here is a link to the Hunter wheel balancers for your convenience...

If I couldn't find this exact fluid elsewhere, I would CERTAINLY go to the Nissan dealer and purchase it and keep the receipt as proof. Why take a chance to save a few bucks? Just my thoughts, others will vary. Stan

I couldn't help but notice, NICE SHOP!

A friend of mine is the manager of a WalMart automotive center. He tells me the decision to do away with A/C Delco and Motorcraft products is not one which WalMart made. According to him, it was the decision of "A/C Delco" and "Motorcraft" to discontinue marketing through WalMart. They still...

2005tundra2002yz250f, Your original plan looks great. That Toyota engine will last longer than you want to keep the vehicle.