Search results

Oil pan guy, if you follow my method which can be done at home, which I will post with photos (Soon), your rust will disappear completely and be clear for a good 5 yrs before you re-treat it. Removing the oil pan is quite a pain for the engine, and you want to avoid it. It can mean new gaskets...

Photos for my rust removal method soon, with explanation. Believe me Bluestream, I've completely solved it now. The puzzle is no more.

Need some assistance. Just checking.

I second the guy who mentioned the injectors. (Check the ohms if possible if they are going out of spec) I doubt it's carbon buildup - not at 2010...At least the VG30 engines are not that finicky, they aren't that sensitive. Maybe after 20 yrs of use, like another 92 maxima I just tore down last...

I called a blast supply place and they said in Canada you can't use silica inside a shop anymore. He said the rule doesn't apply outdoors though IF you can contain the dust etc.. I then found out that Black Beauty (Aluminum Oxide) can be bought in 55 lb bags for cheaper than the silica. He...

So after much reading it appears the NIOSH P100 half mask is not qualified for use for silica sand blasting. I know someones going to say 'just use another media' - not really possible since it's outdoors, high pressure, and it flies everywhere. So I've been researching supplied air systems. I...

But Mechtech, have you ever heard of a new OEM Bosch fuel pump dying in 20,000 KM? Besides testing the resistance of the actual pump, is there another test I can do on the pump to see if it is dying?

Thanks guys. Some response. Willix: There is a point I should mention regarding the vent system. 1. The gas tank has a dedicated hose coming out (1 foot length) that is a "breather hose" for the tank. This hose would connect to a steel pipe that goes all the way to the engine bay, and connects...

440 here's an update, I just put in a new fuse, and I turned key to ON position, not start, to hear the fuel pump operate, and I pulled the fuse out immediately after just hearing the operation of the pump, without the starter moving, and the fuse is blown. Don't know if that helps.

It's always the same fuse - the fuel pump fuse. I don't think it's dirty gas, I only drove about 5 minutes after I installed the new filter before it failed. I highly doubt it would clog that quickly. Also, now when I turn the key to start, the fuel pump doesn't make the ON sound like it's...

Oh and Colt, I checked the fuel pump resistance with the DMM, across the 2 terminals like the manual says, and it's at spec. One strange symptom I thought I would mention, when I went to replace the fuel filter, before the driving when it died out, when I removed the top hose from the fuel...

Can this situation lead to the degradation of certain parts - like the fuel pressure regulator or fuel pump? Today I had to have my car towed on the main road because I was driving down a hill (after I replaced the fuel filter with a new one), and it died suddenly. Fuel Pump fuse blown when I...

Very bizarre Colt. It just blew another one again. I then went and jiggled the wires, the unplugged then plugged back in the fuel pump, then put in a new fuse, and it blew the new fuse again. I notice that it idles quite high immediately when the car turnes on, then dies from there. I'm going...

UPDATE: So I removed both back seats to do a visual inspection of the wires to the fuel pump. I don't see any visual signs of bare wire or any cracks in the insulation. I did move the wires around a bit checking all sides. There is no water in the back as I patched those wheel well rust holes...

Thanks everyone, here's some responses: JHZ: Fuel pump was replaced with new OEM Bosch #E3000-163020 - this pump was a rip - like $365.00 The pump was installed in FEB 2008 and has 18,253 KM on it up to today. When the mechanic installed it back then (because I didn't know car stuff back...

Curious what you guys think to the lifespan of those fuel filters. The car was sitting over the winter, and it did have Stabil in the fuel, and I just ran this car about 500 KM OK, but I notice that it has been getting a tad weak during starting, like the fuel could not be getting through...

Update: I called my 70 yr old machinist buddy and he started laughing at me when I said 3 months. He said "go get a hobby - get a girlfriend" :), as in i'm a fool, just park it. He also said oil can do just fine or 2-stoke oil...you don't need the "fogging oil", squirt it into the spark plug...

Hummm, this is interesting new information rclint. Don't forget I just completed the overhaul in NOV and I haven't put on even 2000 KM yet. I had the non-precision hone done to restore the cross hatch, so it's possible my cast iron cylinders are still newish with the cross hatch. This is...

Thanks for the tips guys. That's what I was thinking, it's probably not even necessary. Todays JAN 22. I'll be turning the maxima back on the road once the salt and snow melts which will be MAY 1 likely. Plus, i'll admit that this car sat for almost a yr once with no fogging oil over a winter...

I bought a can of the Canadian Tire engine fogging oil, spray can. Directions say to spray it in the spark plug holes, then rotate engine by hand. Months later when I go to start up the engine, do you guys think that this fogging oil in there, will burn and form black carbon deposits on my clean...