Search results

  1. G

    K&N filters...and silicone levels?

    Having used K&N filters (and never had a problem!), AND having looked thru these filters outside...and had a problem (just see too much sky!) , I compared the K&N air filter to a cut up Napa Gold oil filter I had on my workbench, and came to the following conclusion: Any dirt or sand getting...
  2. G

    Thicker vs thinner...

    A Honda technician friend who does a fair bit of racing as well swears by the following for his Honda/Acura vehicles. ( All high-revving 4 cyl). M1 15W50 in the summer; M1 0W20 in the winter. He knows all about Honda and Ford's shift to xW20 year round; The dealer he works for uses only the...
  3. G

    Given a choice...Pick one...!

    If you had nothing else, only 0/5W20 or 15W50, what would YOU! use, and why? PS: It's summer (in N.Amer. at least...)and getting hotter by the week...!
  4. G

    Castrol Syntec 5W40

    Napa Auto in Calgary , Canada now stocks Castrol Syntec 5W40, Made in Belgium. The price is $ 9.03 per liter. GC is $ 6.66 a liter, a fairly big difference. Is it worth it...?
  5. G

    Synthetic vs Conv...Cold weather

    It has been VERY cold where I live over the past couple of weeks, as low as -30c (-22f). In my frozen stupor, I was wondering if a synthetic say, 10W30 would pump and flow way better than a conventional 10w30, or be very close. I realize that both oils must pass standardized tests to obtain the...
  6. G

    Wix "flying saucer" bypass...

    I just purchased 2 Napa Gold 1344 oil filters for my Hondas. Both came in identical boxes, but the filters were completely different, except for the number, 1344. (Oversize for the 1334) The first one was the regular style 1344 I'm used to; orange ADBV, conventional bypass (closed end) etc. The...
  7. G

    Thickeners...or thinners?

    Someone in another thread is "debating" whether 5W30 is thin oil with thickeners; or a thick oil with thinners...? I was always under the assumption that most oils start off as a rather thin base oil, using viscosity modifiers to get the desired operating temp. viscosity. ...And I was always...
  8. G

    Mobil 1... the runt of the Mobil synthetic line-up?

    It seems that M1 is the weakest of the three commonly available (relatively speaking...) Mobil synthetic oils. Delvac 1 seems almost universally liked, and the MXT4 and V-Twin motorcycle oil has its groupies as well. Are these oils that much better than M1, if at all? They certainly are much...
  9. G

    M1 Motorcycle vs. M1 auto...

    A friend just asked if I wanted a case of M1 MX4T motorcycle oil, a 10W40 motorcycle oil. He sold his bike this fall, and thought I could use it in my car...for FREE!!! What makes the motorcycle formula different from the car formula...I know bikes tend to run the same oil thru both engine and...
  10. G

    OIL Catch cans...anybody use one?

    OIl catch can...Used in place of a pcv valve or direct atmospheric venting...seems like a better idea than dumping back thru the intake... Can you re-use the oil...would you want to...? Any thoughts...
  11. G

    OIL Catch cans...anybody use one?

    OIl catch can...Used in place of a pcv valve or direct atmospheric venting...seems like a better idea than dumping back thru the intake... Can you re-use the oil...would you want to...? Any thoughts...
  12. G

    Synth. vs. Conventional... today!

    I began using synthetic oil about 10+ years ago...the temp. was - 25C; and I was topping up with some Pennzoil (I think?) 10W30 that was sitting in the unheated shop. The oil would NOT pour out of the bottle...I'm thinkin' this can't be real good for the engine, either. An enlightened mechanic...
  13. G

    BMW LL-01, Merc. 229.5 ? Good Stuff ???

    Does anybody know the specifics of these standards? What are they, and how tough are they to pass? And why are there SO FEW! oils available in N.A that meet them. M1 0W40 and Castrol GC 0W30 are the only two OTC products that meet these specs...(are there others...?) Is an oil that meets...
  14. G

    What is worse...!

    My cars factory airbox sucks the majority of its air from the fenderwell area: What is worse, a premium paper filter in the stock airbox sucking up BRAKE DUST! (it gets through the filter, shows up as a dark, rust coloured residue), OR... A K&N cone filter underhood...warm air...etc. I have run...
  15. G

    Gas in oil...how much is too much?

    My Honda stalled at a light, and decided not to start again , #$%*!. Great, it's Halloween night, and its -10 c outside. Anyway...the car has been cranked over a zillion times; no start, but sure reaks of gas. Sooooooo... how is the oil...? Would you change it? Or, when (if?) the car starts...
  16. G

    Opinions on Redline

    Where I live, Redline is "on sale" for $12.00 Cdn This compares to $6.98 Cdn for M1, and $6.66 Cdn for GC. Delvac 1 is $8.50 Cdn per liter. While opinions may vary as to how good (gold?) Redline oil is, one cannot argue with the fact that it is VERY expensive... Is it TWICE as good as the...
  17. G

    Napa Gold for HONDA/ACURA

    I went to grab a Napa Gold 1334 for my wife's Acura EL... store didn't have one in stock...parts guy suggested a 1344. This filter has identical specs to the 1334, but is about one inch+ taller, with a much bigger filter element...and the gasket is identical (the specs say the gasket is...
  18. G

    Restrictive oil filters...?

    Is ANY filter (with a built in bypass) really restrictive, given the fact that the bypass is typically set so low ( 8 - 17 psi)? It seems that in any situation where restriction might be a problem...IE cold starts, high rpms, clogged filter etc, the bypass valve will always (hopefully!) open...
  19. G

    Thick oil...Or thin...???

    Mercedes SLR - 5w50 Ferrari 360 - 10w60 Bmw M... - 10w60 Mustang Cobra 15w50 ( I think...?) See a pattern here?...ultra high performance, usually high revving...Why do these engines spec such thick oil? Yet...Honda, Ford etc are moving towards 20w...Why? Fuel economy only, or start up...
  20. G

    GIII vs PAO , again!

    Has ANYBODY!?, Run GIII oil through multiple extended drain intervals, then done UOAs? Has ANYBODY!? done a legitimate, comparitive cold pour test at a COLD temp, IE -30 C (- 22 F)or colder... Can ANYBODY!? tell exactly what the composition is of Brand X synthetic oil? (IE...QS, what the heck...
Back
Top