Search results

Magnetti Marelli is a division of Fiat/Chrysler that also owns Alfa Romeo. They use parts made by their company .FWIW Oldtommy

Somewhere I read last week that refiners were released by EPA from the usual June mandate for lower vapor pressure fuel due to COVID19 emergency. This was due to the fact that storage tanks are still holding large quantities of 'winter' blend gasoline. I don't recall that a new date was stated...

Thank you for sharing this with BITOG members. A shout out also to United for this annual excursion. A MERRY CHRISTMAS to all! Oldtommy

Amazon sells a German made FL22 in both concentrate and 50/50 strength in 1.5L at a very good price. Check it out. Previously reported above by VQ35DE. Oldtommy

If you go with greaseable units, be sure to know the proper grease to use with /your HAND gun using grease that is specked by the ball joint mfg. One pump is enough, two pumps may be too many. FWIW Oldtommy

Could be a slightly bent wheel. Road force balancing will not pick this up. FWIW oldtommy

Check insurance rates for a 16 year old in a Jeep before you buy. You may be very surprised. FWIW Oldtommy

Could it possibly be a dirty injector? How many miles has it been since a treatment of PEA ( I like Chevron or Gumout) ? Just a thought you might try first. FWIW Oldtommy

The best thing you can do is to compare KWH cost with nat. gas cost if available. In OH the cost of nat. gas to heat water makes electric water heaters obsolete. FWIW. Oldtommy

A

Nicat,--- To further explain; the design on the insulator is to remove heat in order to keep the CORE at the proper temperature to prevent preignition. The longer the insulator, the hotter the plug. when you have a shorter insulator. you allow it to dissipate the heat to the outside more...

I did not read your first post. However, the problem may be that you could use a cooler range spark plug. Check the plug insulator to see if it shows signs of blistering. Champion spark plugs at one time had a good lesson on 'reading' spark plug problems on their website. At 4500-5000 RPM the...

Ditto that Oldtommy

And don't forget Bill "grumpy' Jenkins that we lost last year. There was a tribute to ' grumpy' written by Shirley Muldowney in Hot rod magazine that told of the help he had given to her at the start of her drag racing career. Very touching. My son and I were regulars at Thompson and Dragway 42...

Dawn dishwasher detergent. It works! Oldtommy

Have you done an oil analysis? Anything that would show up such as lead would be an indicator to watch. FWIW Oldtommy

The best product I have found for anti seize is powered graphite. The kind that is sold for lock lubrication. Place a small quantity lengthwise on the plug threads and gently rub. It is a conductor so that it does not interfere with conductivity and is not effected by heat. Don't worry about...

Your mazda3 has an OLM. Why don't you reset this after your next oil change and use the OLM in the future? FWIW oldtommy

Why is it that you don't trust FMC engineers? they spent millions of $ on engineering something and you want to change it! Trust them! they know what they are doing. FWIW oldtommy

Solution Find wellhead Replace all galvanized with plastic Replace with new submersible pump(Carefully selected) Install pitless adapter on existing casing Install pump as instructed above; 3 ft. off the bottom sediment Charge diaphragm tank as you have suggested. Good to go for another 30...