Search results

Just wanted to update anyone who may be interested: I ran new oil in my truck for about 4200 miles (25k-29.2k) before changing it again. I sent some off to blackstone for analysis and took a close look at the filter media and what was at the bottom of the drain pan. I found no larger chunks of...

I would take a look at the oil and filter yourself next time you need to do a change. Also, get an oil analysis. The shavings you’re talking about on the dipstick may be from the dipstick scraping the sides of the tube as you remove and replace it to check your oil level. Do you happen to have...

Maybe I’ll switch it up next oil change. If it looks this bad again (or worse) I may trade it while it still has good resale value. Time will tell.

No. Correct me if I’m wrong, but I believe that recall was for the Tundras, not the Tacomas.

I did and nothing stuck to the magnet

I could try that. I have a fumoto valve on right now. Not sure if it’s true, but I read somewhere that the fumoto valve sits up slightly higher in the oil pan, allowing for some oil to pool on the bottom even after draining all of the oil. I’m wondering if some debris from break in was trapped...

Yes, that’s correct. What’s pictured was poured out of the oil filter housing. The oil drained straight from the engine looked mostly normal. It had a tiny bit of sparkle, but I think most used oil would show a slight amount of glitter if you took a flashlight to it.

This is the oil from pouring it out of I could take it in for documentation but I would be surprised if they investigated further because the truck shows no symptoms of engine damage as of now

Interesting, thanks for the attachment. “Sliver” was probably a bad word to use. It was more of a larger, flat, oval-shaped flake. Probably half the size of a grain of rice. The oil in the pan was poured directly from the oil filter housing, so I’m thinking the oil filter may have caught some...

Mobil 1 Extended Performance 0w-20

Forgot to mention I cut the oil filter open. I found one small sliver of metal in one of the folds. It was clean other than that

As of now, I’m a little reluctant to go to the dealer with this. My truck has an OTT tune and I don’t want them to find out and use it as an excuse to void my warranty. If my oil still looks like this at 30k, I’ll reflash the stock tune and go to the dealer

Are there any tests that would tell me what the larger particles are? I put a magnet to them and they didn’t stick

Hopefully you are right. I’ve gotten various feedback on my pictures on other forums. Some people are telling me it’s nothing, some believe the engine will go out any day! I’ll keep an eye on it and send another sample next oil change

No, not that I’ve noticed

First time poster so if I’m not posting correctly I apologize. This is what I found at the bottom of my oil pan after pouring out my oil filter at 25k on my 23 Tacoma. I’ve done oil changes every 5k but noticed more flake on this change. I’ve done a couple blackstone analyses on this truck in...